#	Pagina
attuale pagina	/open-h2020/projects/220990/index.html

Opendata, web and dolomites

GUDGET SIGNED

GUst generators and model DesiGn for transonic wind tunnel tEsTs

Total Cost €

EC-Contrib. €

Partnership

Views

GUDGET project word cloud

Explore the words cloud of the GUDGET project. It provides you a very rough idea of what is the project "GUDGET" about.

joining air installed gg configuration gust dream purpose off generator ctec loads comply candidates supporting answers chosen cfd manufacture amplitude airfoils considering numerical moved parallel universities half dynamic gudget investigation model actuators calibrated companies wall cfp08 ibk polimi outside preliminary care manufacturing s3ch setup solution acquisition cfp tm innovative 38 tilting predict aeroelastic designed 2018 interface avdes final facility experimental verify enhanced blowing cs2 dictated jti trade perform verified campaign onera actuation fluidic configurations calibrate install 01 manufactured wt combination database mechanical transonic fed special connected scope models slots gather

Project "GUDGET" data sheet

The following table provides information about the project.

Coordinator	IBK-INNOVATION GMBH & CO. KG Organization address address: BUTENDEICHSWEG 2 city: HAMBURG postcode: 21129 website: www.ibk-innovation.de contact info title: n.a. name: n.a. surname: n.a. function: n.a. email: n.a. telephone: n.a. fax: n.a.
Coordinator Country	Germany [DE]
Total cost	1˙216˙875 €
EC max contribution	1˙216˙875 € (100%)
Programme	1. H2020-EU.3.4.5.4. (ITD Airframe)
Code Call	H2020-CS2-CFP08-2018-01
Funding Scheme	CS2-RIA
Starting year	2019
Duration (year-month-day)	from 2019-03-01 to 2021-02-28

Partnership

Take a look of project's partnership.

#	participants	country	role	EC contrib. [€]
1	IBK-INNOVATION GMBH & CO. KG IBK-INNOVATION GMBH & CO. KG Organization address address: BUTENDEICHSWEG 2 city: HAMBURG postcode: 21129 website: www.ibk-innovation.de contact info title: n.a. name: n.a. surname: n.a. function: n.a. email: n.a. telephone: n.a. fax: n.a.	DE (HAMBURG)	coordinator	362˙250.00
2	AVIATION DESIGN AVIATION DESIGN Organization address address: 5 RUE DES ACACIAS ZA DU CHENET city: MILLY-LA-FORET postcode: 91490 website: www.adjets.com contact info title: n.a. name: n.a. surname: n.a. function: n.a. email: n.a. telephone: n.a. fax: n.a.	FR (MILLY-LA-FORET)	participant	413˙750.00
3	CEDRAT TECHNOLOGIES SA CEDRAT TECHNOLOGIES SA Organization address address: CHEMIN DU VIEUX CHENE 59 city: MEYLAN postcode: 38240 website: www.cedrat-technologies.com contact info title: n.a. name: n.a. surname: n.a. function: n.a. email: n.a. telephone: n.a. fax: n.a.	FR (MEYLAN)	participant	277˙000.00
4	POLITECNICO DI MILANO POLITECNICO DI MILANO Organization address address: PIAZZA LEONARDO DA VINCI 32 city: MILANO postcode: 20133 website: www.polimi.it contact info title: n.a. name: n.a. surname: n.a. function: n.a. email: n.a. telephone: n.a. fax: n.a.	IT (MILANO)	participant	114˙000.00
5	DREAM INNOVATION SRL DREAM INNOVATION SRL Organization address address: VIA F. PARRI 1 city: SANT'ARPINO postcode: 81030 website: n.a. contact info title: n.a. name: n.a. surname: n.a. function: n.a. email: n.a. telephone: n.a. fax: n.a.	IT (SANT'ARPINO)	participant	49˙875.00

Map

Project objective

GUDGET answers the CfP JTI-CS2-2018-CfP08-AIR-01-38 and aims at providing an innovative experimental set-up for the investigation of gust loads, to be installed in the transonic facility ONERA S3Ch. The proposal GUDGET will design, manufacture, calibrate, verify and finally install in the ONERA S3Ch WT an enhanced gust generator system and an aeroelastic half-model connected to the WT side wall, with the purpose to support the TM in the execution of a WT test campaign and gather information on the aeroelastic behaviour of the model under high amplitude gust conditions, with the acquisition of a relevant database which will allow to assess the numerical capabilities to predict gust loads. The WT test campaign is outside the scope of the GUDGET project. At this aim, the consortium GUDGET has to perform the design of the experimental setup: design and manufacture the WT model according to technical requirements provided by the TM. Special care will be dedicated to the dynamic characteristics of the final model and that a specific interface with the WT will be implemented. In parallel, the consortium will perform a preliminary trade-off analysis to find the best configuration of the GG to comply with requirements dictated in the topic, by considering innovative configurations of tilting airfoils moved by mechanical actuators as well as blowing slots fed by fluidic actuators or a combination of both. The best solution over a number of candidates will be chosen as the one to be designed in detail and then manufactured, calibrated/ verified and eventually installed in the WT. The GUDGET consortium has been setup by joining well recognized and very experienced companies and universities: IBK and POLIMI with a strong experience in the design, manufacturing and operating of WT models; DREAM for supporting CFD and numerical analysis; AVDES for the manufacturing activities and CTEC for the design and implementation of actuation devices.

Are you the coordinator (or a participant) of this project? Plaese send me more information about the "GUDGET" project.

For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.

Send me an email (fabio@fabiodisconzi.com) and I put them in your project's page as son as possible.

Thanks. And then put a link of this page into your project's website.

The information about "GUDGET" are provided by the European Opendata Portal: CORDIS opendata.