AddMan project deliverables
The page lists 7 deliverables related to the research project "AddMan".
List of Deliverables
| title and desprition | type | last update |
|---|---|---|
Demands for complex metal AM design and modellingA report that links critical metal powder bed AM process parameters and post-processing options to the designer’s geometrical specifications. The report will suggest how these interrelated parameters could be controlled in a CAE-assisted design environment to improve the designer’s ability to predict the performance of components built by powder bed AM. Programme: H2020-EU.3.4.5.4. - Topic(s): JTI-CS2-2016-CFP03-AIR-01-16 |
Documents, reports | 2020-01-20 |
Initial dissemination and exploitation plan including communicationOne of the key objectives of the project is to maximise the impact of the project results by dissemination and exploitation activities including communication. Further, dissemination and exploitation of project results are an obligation for every Horizon 2020 project. Therefore, the project will set up a dissemination and exploitation plan at the beginning of the project which will be then carried on and updated throughout the project\'s lifespan. Programme: H2020-EU.3.4.5.4. - Topic(s): JTI-CS2-2016-CFP03-AIR-01-16 |
Documents, reports | 2020-01-20 |
Web-site and other dissemination materialThe purpose of this deliverable is to to develop the project website and to create the dissemination materials to promote and communicate the project at local, national and European level. Programme: H2020-EU.3.4.5.4. - Topic(s): JTI-CS2-2016-CFP03-AIR-01-16 |
Websites, patent fillings, videos etc. | 2020-01-20 |
Communication between Catia and FEA/TO softwareA computer implementation which makes it possible for a geometry description in CATIA to be used by a mesh generator, giving input to the FE program TRINITAS. Programme: H2020-EU.3.4.5.4. - Topic(s): JTI-CS2-2016-CFP03-AIR-01-16 |
Other | 2020-01-20 |
Evaluation of at least five different post processes for improved surface characteristicsSeveral different post processing methods will be investigated and their effect on fatigue performance of EBM and SLM surfaces will be determined. Programme: H2020-EU.3.4.5.4. - Topic(s): JTI-CS2-2016-CFP03-AIR-01-16 |
Documents, reports | 2020-01-20 |
Fatigue characterization of at least two of the post processes evaluated in D2.3The S-N curves and fatigue limit for specimens with an as built AM surface will be compared to that of specimens with different post processing histories. The results will be analyzed and reported. Programme: H2020-EU.3.4.5.4. - Topic(s): JTI-CS2-2016-CFP03-AIR-01-16 |
Documents, reports | 2020-01-20 |
Computer implementation of TO method for optimal AMA computer implementation of TO, based on the SIMP approach, taking into account (1) anisotropic material properties, (2) the built direction of the AM process, (3) graded material, and (4) stress constraints modeling experimentally determined yield and strength properties. Programme: H2020-EU.3.4.5.4. - Topic(s): JTI-CS2-2016-CFP03-AIR-01-16 |
Other | 2020-01-20 |