STAMPEM
STAble and low cost Manufactured bipolar plates for PEM Fuel Cells
| Coordinatore | STIFTELSEN SINTEF
Organization address
address: Strindveien 4 contact info |
| Nazionalità Coordinatore | Norway [NO] |
| Totale costo | 5˙223˙807 € |
| EC contributo | 2˙576˙505 € |
| Programma | FP7-JTI
Specific Programme "Cooperation": Joint Technology Initiatives |
| Code Call | FCH-JU-2011-1 |
| Funding Scheme | JTI-CP-FCH |
| Anno di inizio | 2012 |
| Periodo (anno-mese-giorno) | 2012-07-01 - 2015-06-30 |
Partecipanti
| # | ||||
|---|---|---|---|---|
| 1 |
STIFTELSEN SINTEF
Organization address
address: Strindveien 4 contact info |
NO (TRONDHEIM) | coordinator | 649˙620.00 |
| 2 |
ELRINGKLINGER AG
Organization address
address: MAX EYTH STRASSE 2 contact info |
DE (DETTINGEN AN DER ERMS) | participant | 991˙886.00 |
| 3 |
THE UNIVERSITY OF BIRMINGHAM
Organization address
address: Edgbaston contact info |
UK (BIRMINGHAM) | participant | 303˙121.00 |
| 4 |
Teer Coatings Limited
Organization address
address: WEST STONE HOUSE, BERRY HILL INDUSTRIAL ESTATE contact info |
UK (DROITWICH) | participant | 269˙812.00 |
| 5 |
FRAUNHOFER-GESELLSCHAFT ZUR FOERDERUNG DER ANGEWANDTEN FORSCHUNG E.V
Organization address
address: Hansastrasse 27C contact info |
DE (MUENCHEN) | participant | 198˙904.00 |
| 6 |
Fronius International GmbH
Organization address
address: Vorchdorfer Strasse 40 contact info |
AT (Pettenbach) | participant | 163˙162.00 |
Mappa
Word cloud
Esplora la "nuvola delle parole (Word Cloud) per avere un'idea di massima del progetto.
Obiettivo del progetto (Objective)
'One key component in the PEMFC which contributes significantly to cost, weight, volume of the stacks and still needs to be improved to ensure cell lifetime is the BiPolar Plate (BPP). Metal based bipolar plates are very attractive, but a protective coating is needed to avoid corrosion and keep the interfacial contact resistance low.
The STAMPEM-consortium has been established acknowledging that further development of BPPs require Europe’s best available resources, with respect to both human competence and infrastructure (laboratories). The objective in STAMPEM is to develop a new generation coating for low cost metallic bipolar plates for PEMFCs, with robust and durable properties for assembly and manufacturing, showing high performance after more than 10000 hours of operation.
The concept of STAMPEM is to combine world leading industrial actors capable of volume manufacturing with research institutions with the required generic competence capable of providing breakthrough solutions with respect to a new generation coating for low cost metallic BPPs. By involving an end user of the BPPs developed in the STAMPEM project, the results will be thoroughly verified under realistic operating conditions in a PEMFC stack.
The initial phase of the project will be used to establish a testing protocol for BPP materials. In order to screen materials basic corrosion experiments will be performed with contact resistance measurements before and after the testing. Promising materials will further be tested in fuel cells and even further in stacks. The BPP materials go through a real mass production cycle, and also the real production cost will be analyzed. Also the possible detrimental contamination of the membrane will carefully be investigated. The most promising materials will in the end be fully integrated into a system. and that also can be produced in series to provide the building blocks in other fuel cell vehicles.'
Introduzione (Teaser)
Cost and durability represent the main obstacles to full commercialisation of proton exchange membrane fuel cell (PEMFC) technology for vehicles. An EU-funded project is developing suitable materials for high-performance PEMFCs with a long lifetime.