Opendata, web and dolomites

TOMOCON SIGNED

Smart tomographic sensors for advanced industrial process control

Total Cost €

0

EC-Contrib. €

0

Partnership

0

Views

0

Project "TOMOCON" data sheet

The following table provides information about the project.

Coordinator
HELMHOLTZ-ZENTRUM DRESDEN-ROSSENDORF EV 

Organization address
address: BAUTZNER LANDSTRASSE 400
city: DRESDEN
postcode: 1328
website: www.hzdr.de

contact info
title: n.a.
name: n.a.
surname: n.a.
function: n.a.
email: n.a.
telephone: n.a.
fax: n.a.

 Coordinator Country Germany [DE]
 Project website https://www.tomocon.eu
 Total cost 3˙819˙642 €
 EC max contribution 3˙819˙642 € (100%)
 Programme 1. H2020-EU.1.3.1. (Fostering new skills by means of excellent initial training of researchers)
 Code Call H2020-MSCA-ITN-2017
 Funding Scheme MSCA-ITN-ETN
 Starting year 2017
 Duration (year-month-day) from 2017-09-01   to  2021-08-31

 Partnership

Take a look of project's partnership.

# participants  country  role  EC contrib. [€] 
1    HELMHOLTZ-ZENTRUM DRESDEN-ROSSENDORF EV DE (DRESDEN) coordinator 498˙432.00
2    UNIVERSITY OF BATH UK (BATH) participant 546˙575.00
3    ITA-SUOMEN YLIOPISTO FI (KUOPIO) participant 538˙290.00
4    TECHNISCHE UNIVERSITEIT DELFT NL (DELFT) participant 510˙748.00
5    POLITECHNIKA LODZKA PL (LODZ) participant 448˙274.00
6    LAPPEENRANNAN-LAHDEN TEKNILLINEN YLIOPISTO LUT FI (LAPPEENRANTA) participant 269˙145.00
7    CHALMERS TEKNISKA HOEGSKOLA AB SE (GOETEBORG) participant 263˙659.00
8    INSTITUT NATIONAL POLYTECHNIQUE DE TOULOUSE FR (TOULOUSE CEDEX 4) participant 262˙875.00
9    KARLSRUHER INSTITUT FUER TECHNOLOGIE DE (KARLSRUHE) participant 249˙216.00
10    TECHNICKA UNIVERZITA V LIBERCI CZ (LIBEREC) participant 232˙422.00
11    CERG Fluides FR (LE PONT DE CLAIX) partner 0.00
12    DuPont Ltd. FI (Kantvik) partner 0.00
13    Frames NL (Alphen aan den Rijn) partner 0.00
14    LINDE AG DE (MUNCHEN) partner 0.00
15    Netrix S.A. PL (Lublin) partner 0.00
16    Pinta Elements GmbH DE (Maisach) partner 0.00
17    PRIMETALS TECHNOLOGIES AUSTRIA GMBH AT (LINZ) partner 0.00
18    Rocsole Oy FI (Kuopio) partner 0.00
19    SHELL GLOBAL SOLUTIONS INTERNATIONAL BV NL (RIJSWIJK) partner 0.00
20    Siemens AG DE (Hamburg) partner 0.00
21    SULZER MANAGEMENT AG CH (WINTERTHUR) partner 0.00
22    Tata Steel Europe Ltd. NL (Velsen-Noord) partner 0.00
23    TECHNISCHE UNIVERSITAET DRESDEN DE (DRESDEN) partner 0.00
24    TELETRONIC ROSSENDORF GMBH DE (RADEBERG) partner 0.00
25    TOTAL S.A. FR (COURBEVOIE) partner 0.00
26    UNIVERSIDADE FEDERAL DO PARANA BR (CURITIBA) partner 0.00
27    Vötsch Industrietechnik GMBH DE (Reiskirchen) partner 0.00

Map

 Project objective

A decisive gap in the process industry is the lack of qualified distributed process parameter measurements for optimal control. Process tomography is a ground-breaking technology to bridge this gap. Just with the recent development in high-power massive parallel computing this technology has gained the required real-time capability. TOMOCON as a European network of leading academic and industrial partners from different sectors dedicates its efforts in research and training towards development of tomography-based industrial process control. With that it shall generate new scientific and technical knowledge in this emerging field; develop and demonstrate new technological solutions of advanced industrial control by tomographic sensors; align tomography-based process control with concepts of knowledge-based control, big data analysis and advanced human-machine interfaces; and enhance the scientific and transferable skills of early stage researchers to meet future needs of the industry. Together with world-leading industrial sensor and control solution providers, process engineering and production companies TOMOCON shall demonstrate the functionality of tomography-assisted process control in four industry-relevant demonstration cases, which serve as benchmarks to demonstrate improvements in energy and resource efficiency as well as product quality. That is: control of inline fluid separation, control of microwave drying processes, control of continuous metal casting, and control of batch crystallization processes.

 Deliverables

List of deliverables.
General Methodology for Tomography-assisted Control Documents, reports 2020-01-14 16:56:26
Detailed Plan for Lab Demonstrations Documents, reports 2020-01-14 16:56:30
Preliminary Sensor Design with Basic Parameters for Demonstration Documents, reports 2020-01-14 16:56:29
Virtual Controller Structures for TOMOCON Demonstrations Documents, reports 2020-01-14 16:56:29
Detailed Plan for Virtual Demonstrations Documents, reports 2020-01-14 16:56:30
Virtual Demonstration Results Documents, reports 2020-01-14 16:56:29
Virtual Process Tomography Data for TOMOCON Demonstrations Documents, reports 2020-01-14 16:56:30
Data management plan Open Research Data Pilot 2019-07-05 14:45:02
Project Brochure/Flyer and Media Communication Websites, patent fillings, videos etc. 2019-07-05 14:45:02
Website Structure, Functions and Content Websites, patent fillings, videos etc. 2019-07-05 14:45:02

Take a look to the deliverables list in detail:  detailed list of TOMOCON deliverables.

 Publications

year authors and title journal last update
List of publications.
2020 Muhammad Awais Sattar, Aluisio do N. Wrasse, Rigoberto E.M. Morales, Daniel Rodrigues Pipa, Robert Banasiak, Marco J. Da Silva, Laurent Babout
Multichannel Capacitive Imaging of Gas Vortex in Swirling Two-Phase Flows using Parametric Reconstruction
published pages: 1-1, ISSN: 2169-3536, DOI: 10.1109/access.2020.2986724
IEEE Access 2020-04-24
2020 Benjamin Sahovic, Hanane Atmani, Muhammad Awais Sattar, Matheus Martinez Garcia, Eckhart Schleicher, Dominique Legendre, Eric Climent, Remi Zamansky, Annaig Pedrono, Laurent Babout, Robert Banasiak, Luis M. Portela, Uwe Hampel
Controlled Inline Fluid Separation Based on Smart Process Tomography Sensors
published pages: 1-11, ISSN: 0009-286X, DOI: 10.1002/cite.201900172
Chemie Ingenieur Technik Volume 92, Issue 5 2020-04-04
2020 Soheil Aghajanian, Tuomas Koiranen
Dynamic modeling and semibatch reactive crystallization of calcium carbonate through CO2 capture in highly alkaline water
published pages: 366-374, ISSN: 2212-9820, DOI: 10.1016/j.jcou.2020.02.018
Journal of CO2 Utilization 38 2020-03-11
2019 Shereen Abouelazayem, Ivan Glavinić, Thomas Wondrak, Jaroslav Hlava
Control of Jet Flow Angle in Continuous Casting Process using an Electromagnetic Brake
published pages: 88-93, ISSN: 2405-8963, DOI: 10.1016/j.ifacol.2019.09.169
IFAC-PapersOnLine 52/14 2020-01-30
2019 Panagiotis Koulountzios, Tomasz Rymarczyk, Manuchehr Soleimani
A Quantitative Ultrasonic Travel-Time Tomography to Investigate Liquid Elaborations in Industrial Processes
published pages: 5117, ISSN: 1424-8220, DOI: 10.3390/s19235117
Sensors 19/23 2019-11-28
2019 H. Atmani, D. Legendre, R. Zamansky, E. Climent, A. Pedrono, B. Sahovic, E. Schleicher, U. Hampel, M. A. Sattar, L. Babout, R. Banasiak
Hybrid CFD simulation of two phase flow in inline flow splitters using VoF and Lagrangian models
published pages: , ISSN: , DOI:
10th International Conference on Multiphase Flow - ICMF 2019 19-24 May 2019 2019-09-26
2019 Muhammad Awais Sattar, Robert Banasiak, Jacek Nowakowski, Arto Voutilainen, Jouni Hartikainen, Mika Mononen, Laurent Babout
Estimation Of Phantom Vortex Size For Liquid Gas Separation Using Electrical Tomography
published pages: , ISSN: , DOI:
International Interdisciplinary PhD Workshop 15-17 May 2019 2019-08-29
2019 S.Aghajanian, H. Nieminen, T. Koiranen
Precipitation of calcium carbonate in highly alkaline solution through carbonated water
published pages: , ISSN: , DOI:
The Second International Process Intensification Conference (IPIC2) 27-29 May 2019 2019-08-29
2019 B. Sahovic, P. Wiedemann, E. Schleicher, U. Hampel
Investigation of upstream and downstream flow conditions in a swirling inline fluid separator
published pages: , ISSN: , DOI:
Annual ProcessNet Conference and Annual DECHEMA Conference on Reaction Engineering 27-29 May 2019 2019-08-29
2018 U. Hampel, T. Wondrak, M. Bieberle, G. Lecrivain, M. Schubert, K. Eckert, S. Reinecke
Smart Tomographic Sensors for Advanced Industrial Process Control - TOMOCON
published pages: , ISSN: , DOI:
ProcessNet-Jahrestagung und 33. DECHEMA-Jahrestagung der Biotechnologen 2018 10-15 September 2018 2019-07-05
2018 T. Wondrak, U. Hampel, M. Ratajczak, I. Glavinic, F. Stefani, S. Eckert, D. van der Plas, P. Pennerstorfer, I. Muttakin, M. Soleimani, S. Abouelazayem, J. Hlava, A. Blishchik, S. Kenjeres
Real-time control of the mould flow in a model of continuous casting in frame of the TOMOCON project
published pages: , ISSN: , DOI:
9th International Symposium on Electromagnetic Processing of Materials (EPM2018) 14-18 October 2018 2019-07-05
2018 T. Wondrak, U. Hampel, M. Ratajczak, I. Glavinic, F. Stefani, S. Eckert, D. van der Plas, P. Pennerstorfer, I. Muttakin, M. Soleimani, S. Abouelazayem, J. Hlava, A. Blishchik, S. Kenjeres
Real-time control of the mould flow in a model of continuous casting in frame of the TOMOCON project
published pages: 12003, ISSN: 1757-899X, DOI: 10.1088/1757-899X/424/1/012003
IOP Conference Series: Materials Science and Engineering 424 2019-07-05
2018 U. Hampel, T. Wondrak, M. Bieberle, G. Lecrivain, M. Schubert, K. Eckert, S. Reinecke
Smart Tomographic Sensors for Advanced Industrial Process Control TOMOCON
published pages: 1238-1239, ISSN: 0009-286X, DOI: 10.1002/cite.201855235
Chemie Ingenieur Technik 90/9 2019-07-05

Are you the coordinator (or a participant) of this project? Plaese send me more information about the "TOMOCON" project.

For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.

Send me an  email (fabio@fabiodisconzi.com) and I put them in your project's page as son as possible.

Thanks. And then put a link of this page into your project's website.

The information about "TOMOCON" are provided by the European Opendata Portal: CORDIS opendata.

More projects from the same programme (H2020-EU.1.3.1.)

LIVE-I (2020)

Lightening and Innovating transmission for improving Vehicle: Environmental Impacts

Read More  

MOTOR5G (2019)

MObility and Training fOR beyond 5G Ecosystems

Read More  

NEWAVE (2019)

Next Water Governance

Read More