Opendata, web and dolomites


ERA Chair for emerging technologies and innovative research in Stretchable and Textile Electronics

Total Cost €


EC-Contrib. €






Project "STRENTEX" data sheet

The following table provides information about the project.


Organization address
city: NOVI SAD
postcode: 21000
website: n.a.

contact info
title: n.a.
name: n.a.
surname: n.a.
function: n.a.
email: n.a.
telephone: n.a.
fax: n.a.

 Coordinator Country Serbia [RS]
 Total cost 2˙475˙500 €
 EC max contribution 2˙475˙500 € (100%)
 Programme 1. H2020-EU.4.c. (Establishing ‚ERA Chairs')
 Code Call H2020-WIDESPREAD-2018-04
 Funding Scheme CSA
 Starting year 2020
 Duration (year-month-day) from 2020-01-01   to  2024-12-31


Take a look of project's partnership.

# participants  country  role  EC contrib. [€] 


 Project objective

The motivation behind this Project is to create a point of excellence of the Faculty of Technical Sciences, University of Novi Sad (FTN), Novi Sad, Vojvodina, Serbia, to continuously advance state-of-the-art research, technological innovation and contribution to broader social goals, in the field of Stretchable and Textile Electronics. The Project is set in the framework of the ERA Chair action to simultaneously reinforce the research potentials of the FTN and to create cutting-edge dynamic and sustainable research environment. With the support of the network of existing international/regional/national partners, SMEs and stakeholders, research results will be fruitfully exploited and provide a move from flexible/bendable to stretchable products, defined by the needs of society. These products with a high future market potential, such as human monitoring patches, sensors in baby slings, theranostic dressings, will enable a move from “technology push” to “market pull” and will facilitate involvement of the ERA Chair into “Industry 4.0” revolution. STRENTEX project envisages the following activities: (1) ERA Chair establishment – ERA Chair holder appointment and employment of his/her team members; (2) Implementation of structural changes in FTN, for sustainable excellence; (3) Raising research profile of the FTN and its staff, thanks to ERA Chair; (4) Boosting FTN’s innovative capacities and capabilities; (5) Dissemination, communication and exploitation activities. Thanks to this Project, disparities in terms of research and innovation performance between Serbia and innovation leaders in EU will be significantly decreased. Far-reaching effects of the STRENTEX will be creation of world-class working environment and favourable eco-system for flourishing centre of excellence and innovative start-up companies, strengthening of the Serbian and European economy.


year authors and title journal last update
List of publications.
2017 Nemanja Kašiković, Mladen Stančić, Gojko Vladić, Dragana Grujić, Dragoljub Novaković, Rastko Milošević, Ivan Pinćjer
The influence of heat treatment on the quality of screen printed textile substrates
published pages: , ISSN: 1517-7076, DOI: 10.1590/s1517-707620170001.0123
Matéria (Rio de Janeiro) 22/1 2020-02-13
2018 Mladen Stančić, Nemanja Kašiković, Dragana Grujić, Dragoljub Novaković, Rastko Milošević, Branka Ružičić, Jelka Geršak
Mathematical models for water vapour resistance prediction of printed garments
published pages: 82-88, ISSN: 1472-3581, DOI: 10.1111/cote.12328
Coloration Technology 134/1 2020-02-13
2019 Goran Stojanović, Tijana Kojić, Milan Radovanović, Dragana Vasiljević, Sanja Panić, Vladimir Srdić, Jelena Cvejić
Flexible sensors based on two conductive electrodes and MWCNTs coating for efficient pH value measurement
published pages: 76-83, ISSN: 0925-8388, DOI: 10.1016/j.jallcom.2019.04.243
Journal of Alloys and Compounds 794 2020-02-13
2019 Goran Stojanović, Milica Pojić, Sanja Kojić, Aleksandra Mišan, Dragana Vasiljević
Mechanical properties of edible biofilm as a substrate for printed electronics
published pages: 576-583, 2019, ISSN: 0947-8396, DOI: 10.1007/s00339-019-2881-5
Applied Physics A 125/8 2020-02-13
2019 ijana Koji?, Goran M. Stojanovi?, Aleksandar Mileti?, Milan Radovanovi?, Hani Al-Salami, Fabiana Arduini
Testing and Characterization of Different Papers as Substrate Material for Printed Electronics and Application in Humidity Sensor
published pages: 2981, ISSN: 0914-4935, DOI: 10.18494/sam.2019.2473
Sensors and Materials 31/9 2020-02-13
2017 Kalman Babkovic, Mirjana Damnjanovic, Laszlo Nagy, Milica Kisic, Goran Stojanovic
Inductive Displacement Sensor of Novel Design Printed on Polyimide Foil
published pages: 1-5, ISSN: 0018-9464, DOI: 10.1109/tmag.2016.2636820
IEEE Transactions on Magnetics 53/4 2020-02-13
2018 Dragana Z. Vasiljevic, Aida Mansouri, Luca Anzi, Roman Sordan, Goran M. Stojanovic
Performance Analysis of Flexible Ink-Jet Printed Humidity Sensors Based on Graphene Oxide
published pages: 4378-4383, ISSN: 1530-437X, DOI: 10.1109/jsen.2018.2823696
IEEE Sensors Journal 18/11 2020-02-13
2017 Ivana Tomić, Sandra Dedijer, Pablo Martínez-Cañada, Dragoljub Novaković, Aleš Hladnik
Camera Characterization for Colorimetric Assessment of Goniochromatic Prints
published pages: 205021-2050215, ISSN: 1062-3701, DOI: 10.2352/j.imagingsci.technol.2017.61.2.020502
Journal of Imaging Science and Technology 61/2 2020-02-13
2018 Nemanja Kašiković, Gojko Vladić, Neda Milić, Dragoljub Novaković, Rastko Milošević, Sandra Dedijer
Colour fastness to washing of multi-layered digital prints on textile materials
published pages: 381, ISSN: 1391-4588, DOI: 10.4038/jnsfsr.v46i3.8489
Journal of the National Science Foundation of Sri Lanka 46/3 2020-02-13
2018 Ivana Tomić, Sandra Dedijer, Dragoljub Novaković, Ivana Jurič
Artificial neural networks for optimising camera-based colour measurements of prints enhanced with pearlescent pigments
published pages: 364-372, ISSN: 1472-3581, DOI: 10.1111/cote.12346
Coloration Technology 134/5 2020-02-13
2019 Goran Stojanović, Milan Radovanović, Dragana Vasiljević, Tijana Kojić, Bojana Pivaš, Tatjana Puškar, Sunil Kapadia, Reinhard Baumann
Comparison of Performances of Flexible Tailor-Made Force Sensing Resistors Fabricated Using Inkjet and Xurographic Techniques
published pages: 1-8, ISSN: 1687-725X, DOI: 10.1155/2019/9181492
Journal of Sensors 2019 2020-02-13

Are you the coordinator (or a participant) of this project? Plaese send me more information about the "STRENTEX" project.

For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.

Send me an  email ( and I put them in your project's page as son as possible.

Thanks. And then put a link of this page into your project's website.

The information about "STRENTEX" are provided by the European Opendata Portal: CORDIS opendata.

More projects from the same programme (H2020-EU.4.c.)

R-Exposome Chair (2019)

R-Exposome Chair: Unlocking the potential of RECETOX in Exposome research

Read More  


The creation of the Department of Plant Nanotechnology to maximise the impact of the ERA Chair culture on the IPG PAS

Read More  

Chaperon (2019)

ERA Chair Position for Excellent Research in Oncology

Read More