Opendata, web and dolomites

UMi-TWINN

Reinforcing the scientific excellence and innovation capacity in logistics technologies of the University of Miskolc

Total Cost €

0

EC-Contrib. €

0

Partnership

0

Views

0

Project "UMi-TWINN" data sheet

The following table provides information about the project.

Coordinator
MISKOLCI EGYETEM 

Organization address
address: EGYETEMVAROS
city: MISKOLC
postcode: 3515
website: www.uni-miskolc.hu

contact info
title: n.a.
name: n.a.
surname: n.a.
function: n.a.
email: n.a.
telephone: n.a.
fax: n.a.

 Coordinator Country Hungary [HU]
 Project website http://www.umi-twinn.com/
 Total cost 999˙310 €
 EC max contribution 999˙310 € (100%)
 Programme 1. H2020-EU.4.b. (Twinning of research institutions)
 Code Call H2020-TWINN-2015
 Funding Scheme CSA
 Starting year 2016
 Duration (year-month-day) from 2016-01-01   to  2019-03-31

 Partnership

Take a look of project's partnership.

# participants  country  role  EC contrib. [€] 
1    MISKOLCI EGYETEM HU (MISKOLC) coordinator 490˙310.00
2    FRAUNHOFER GESELLSCHAFT ZUR FOERDERUNG DER ANGEWANDTEN FORSCHUNG E.V. DE (MUNCHEN) participant 207˙327.00
3    TECHNISCHE UNIVERSITAET GRAZ AT (GRAZ) participant 204˙471.00
4    INTELLIGENTSIA CONSULTANTS SARL LU (BERTRANGE) participant 97˙201.00

Map

 Project objective

The overall aim of the UMi-TWINN project is to reinforce the scientific excellence and innovation capacity in logistic systems of the University of Miskolc (UMi) and its high-quality Twinning partners for the benefit of different industries and logistics market. To achieve this aim, the 3 year project will build upon the existing strong research and innovation base of UMi and its twinning partners Fraunhofer-Gesellschaft e.V. IFF (Fraunhofer), Technische Universitaet Graz (TUGraz) and Intelligentsia Consultants (Intelligentsia). The UMi-TWINN project aims to boost UMi and twinning partners' scientific excellence and innovation capacity in logistics technologies, as well as implementing a research and innovation strategy focused on three sub-topics: 1. Design of logistic systems and networks; 2. Intelligent transport systems; 3. Dynamical analysis of materials handling machines.

The research and innovation strategy takes into account the recent SWOT analysis of UMi as well as the national Hungarian research priorities and regional Smart Specialisation Strategy . The specific objectives of the UMi-TWINN project are presented below: Objective 1: Strengthen UMi’s research excellence in Logistics Objective 2: Enhance the research and innovation capacity of UMi and Twinning partners Objective 3: Raise the research profile of UMi and the Twinning Partners Objective 4: Contribute to the research and innovation priorities of Hungary Objective 5: Support research and innovation on a European level

In order to achieve these objectives, the consortium partners defined a comprehensive set of measures and activities implemented via the project’s work packages: * Short term staff exchanges * Training workshops, summer schools and conference * Dissemination and outreach activities

 Deliverables

List of deliverables.
Project newsletters Websites, patent fillings, videos etc. 2019-10-10 18:02:09
Project website Websites, patent fillings, videos etc. 2019-10-10 18:02:07
Project leaflet and poster Websites, patent fillings, videos etc. 2019-10-10 18:02:07
One page statement that Task 4.3 has been completed Websites, patent fillings, videos etc. 2019-10-10 18:02:07
Promotion guide about UMi Websites, patent fillings, videos etc. 2019-10-10 18:02:07

Take a look to the deliverables list in detail:  detailed list of UMi-TWINN deliverables.

 Publications

year authors and title journal last update
List of publications.
2016 Tamás Péter, Illés Béla
Gyártórendszerek folyamatfejlesztési lehetőségei a negyedik ipari forradalomban/Process improvement possibilities for manufacturing systems in the industry 4.0
published pages: pp. 41-48., ISSN: 1454-0746, DOI:
Műszaki Szemle No. 67. (2016) 2019-10-10
2016 Péter Telek
Computer algorithm for determination of material flow relations
published pages: pp. 71-78., ISSN: 1789-2198, DOI:
Advanced Logistic Systems: Theory and Practice Vol. 10/2 (2016) 2019-10-10
2016 József Konyha, Tamás Bányai
Approach to accelerate algorithms to solve logistic problems with GPGPU
published pages: pp. 5-10., ISSN: 1789-2198, DOI:
Advanced Logistic Systems: Theory and Practice Vol. 10/2 (2016) 2019-10-10
2016 Péter Tamás, Béla Illés
Raktár-irányítási rendszerek hatékonyságnövelési lehetőségeinek vizsgálata / Examination of Efficiency Improvement Possibilities for Warehouse Management Systems
published pages: pp. 29-36., ISSN: 1454-0746, DOI:
Műszaki szemle No. 68 (2016) 2019-10-10
2016 P Dobos, P Tamás and B Illés
Decision method for optimal selection of warehouse material handling strategies by production companies
published pages: pp. 1-7., ISSN: 1757-899X, DOI: 10.1088/1757-899X/161/1/012100
IOP Conference Series: Materials Science and Engineering Vol. 161 (2016) 2019-10-10
2017 János Korponai, Ágota Bányainé Tóth, Béla Illés
The Context Between the Shift of Average Demand and the Safety Stock of Purchased Parts
published pages: 275-285, ISSN: , DOI: 10.1007/978-3-319-51189-4_26
Lecture Notes in Mechanical Engineering/Vehicle and Automotive Engineering 2019-10-10
2017 Béla Illés, Róbert Skapinyecz, György Wagner
Description of a Method for the Handling of Customer Needs in Logistics
published pages: 341-354, ISSN: , DOI: 10.1007/978-3-319-51189-4_31
Lecture Notes in Mechanical Engineering/Vehicle and Automotive Engineering 2019-10-10
2017 Korponai János, Bányainé Tóth Ágota, Illés Béla
Az igényváltozások hatása a vásárolt alkatrész készletekre és a költségekre
published pages: 15-32, ISSN: 1789-770X, DOI:
Repüléstudományi közlemények XXVIII./2. (2016) 2019-10-10
2016 Zoltán Varga, György Kovács
New supply chain concepts, flexibility as a key parameter of agile supply chains
published pages: pp. 1-5., ISSN: 2453-675X, DOI:
Acta Technología, International Scientific Journal about Technologies Vol. 2, Issue 4, 2016 2019-10-10
2016 Péter Telek
Material flow relations in the design process of materials handling
published pages: pp. 53-64., ISSN: 1789-2198, DOI:
Advanced Logistic Systems: Theory and Practice Vol. 10/1 (2016) 2019-10-10
2016 Péter Tamás
Application of simulation modeling for formation of pull-principled production control system
published pages: 99-102, ISSN: 1821-4932, DOI:
Journal of Production Engineering Vol. 19., No. 1., 2016 2019-10-10
2017 György Kovács, Zoltán Varga, Márk Mihalik
Optimal Formation of Logistics Networks
published pages: 391-403, ISSN: , DOI: 10.1007/978-3-319-51189-4_35
Lecture Notes in Mechanical Engineering/Vehicle and Automotive Engineering 2019-10-10
2016 Adél Anett Szabó, Ágota Bányai
Sourcing process improvement with six sigma methodology
published pages: pp. 59-64., ISSN: 1789-2198, DOI:
Advanced Logistic Systems: Theory and Practice Vol. 10/2 (2016) 2019-10-10
2017 Péter Veres, Tamás Bányai, Béla Illés
Intelligent Transportation Systems to Support Production Logistics
published pages: 245-256, ISSN: , DOI: 10.1007/978-3-319-51189-4_24
Lecture Notes in Mechanical Engineering/Vehicle and Automotive Engineering 2019-10-10
2016 Kovács György
A Lean ellátási láncok jellemzőinek bemutatása
published pages: pp. 8-12., ISSN: 1454-0746, DOI:
Műszaki Szemle VOL. 68, 2016 2019-10-10
2016 György Kovács
Simulation method for design and analysis of logistical processes
published pages: pp. 65-70., ISSN: 1789-2198, DOI:
Advanced Logistic Systems: Theory and Practice Vol. 10/2 (2016) 2019-10-10
2016 Miklós Gubán, György Kovács
Mathematical model for optimal fuel supply of international transport activity
published pages: 29.-34., ISSN: 1584-2665, DOI:
Annals of Faculty Engineering Hunedoara – International Journal of Engineering Tome XIV (2016), Fascicule 3 (A 2019-10-10
2016 P Tamás, B Illés and P Dobos
Waste reduction possibilities for manufacturing systems in the industry 4.0
published pages: pp. 1-8., ISSN: 1757-899X, DOI: 10.1088/1757-899X/161/1/012074
IOP Conference Series: Materials Science and Engineering Vol. 161 (2016) 2019-10-10
2016 Szabolcs Szentesi, Péter Tamás, Béla Illés
Improvement possibilities for the method of value stream mapping
published pages: pp. 39-48., ISSN: 1789-2198, DOI:
Advanced Logistic Systems: Theory and Practice Vol. 10/2 (2016) 2019-10-10
2016 Gábor Nagy, Ágota Bányai, Béla Illés
Development of courier companies as for the e-commerce market service
published pages: pp. 79-90., ISSN: 1789-2198, DOI:
Advanced Logistic Systems: Theory and Practice Vol. 10/2 (2016) 2019-10-10
2016 Tamás Bányai
Supply chain agility in humanitarian logistics
published pages: pp. 75-81., ISSN: 1789-2198, DOI:
Advanced Logistic Systems: Theory and Practice Vol. 10/1 (2016) 2019-10-10
2016 Péter Tamás
Application of Value Stream Mapping at Flexible Manufacturing Systems
published pages: 168-173, ISSN: 1662-9795, DOI: 10.4028/www.scientific.net/KEM.686.168
Key Engineering Materials 686 2019-10-10
2016 János Korponai, Ágota Bányai, Béla Illés
Sensibility analysis of the planned availability period and of the impact of the cost factors on total costs
published pages: pp. 13-28., ISSN: 1789-2198, DOI:
Advanced Logistic Systems: Theory and Practice Vol 10/1 (2016) 2019-10-10
2018 R Benotsmane, L Dudás, Gy Kovács
Collaborating robots in Industry 4.0 conception
published pages: 12023, ISSN: 1757-899X, DOI: 10.1088/1757-899x/448/1/012023
IOP Conference Series: Materials Science and Engineering 448 2019-10-10
2017 Kovács, György
Development of performance evaluation software for road freight transport activity
published pages: pp. 121-134. , 1, ISSN: 2081-7452, DOI:
POLISH JOURNAL OF MANAGEMENT STUDIES 15 : 1 2019-10-10
2017 György Kovács
First Cost Calculation Methods for Road Freight Transport Activity
published pages: 107-117, ISSN: 1407-6179, DOI: 10.1515/ttj-2017-0010
Transport and Telecommunication Journal 18/2 2019-10-10
2017 Tamás Péter
SMED MÓDSZER HATÉKONYSÁGNÖVELÉSE SZIMULÁCIÓS VIZSGÁLATI MÓDSZER ALKALMAZÁSÁVAL
published pages: pp. 57-63., ISSN: 2498-9037, DOI:
LOGISZTIKA-INFORMATIKA-MENEDZSMENT 17 : 43 (2017) 2019-10-10
2018 Szabolcs, Szentesi ; Péter, Tamás ; Béla, Illés
Novel trends in improvement of warehouse management systems for manfacturing companies
published pages: pp. 33-37. , 5 p, ISSN: 1583-7904, DOI:
ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING 16 : 1 (2018) 2019-10-10
2018 Péter Telek; Béla Illés; Christian Landschützer; Fabian Schenk; Flavien Massi
Material handling machines and systems – UMi-TWINN project contribution
published pages: 7-20, ISSN: 1789-2198, DOI:
Advanced Logistic Systems – Theory and Practice 12(1) 2019-10-10
2017 Péter, Tamás ; Béla, Illés
NOVEL TRENDS IN IMPROVEMENT OF WAREHOUSE MANAGEMENT SYSTEMS FOR MANFACTURING COMPANIES
published pages: pp. 23-28. , 6 p, ISSN: 1583-7904, DOI:
Academic Journal of Manufacturing Engineering 15 : 3 (2017) 2019-10-10
2017 György Kovács
GLOBAL PRODUCTION TENDENCIES – LEAN MANUFACTURING PHILOSOPHY
published pages: 137-140, ISSN: 1821-4932, DOI: 10.24867/jpe-2017-01-137
Journal of Production Engineering 20/1 2019-10-10
2017 Tamás Péter
APPLICATION OF A SIMULATION INVESTIGATIONAL METHOD FOR EFFICIENCY IMPROVEMENT OF SMED METHOD
published pages: pp. 23-30., ISSN: 1583-7904, DOI:
Academic Journal of Manufacturing Engineering 15 : 2 (2017) 2019-10-10
2018 LÁSZLÓ KOTA
ARTIFICIAL INTELLIGENCE IN LOGISTICS APPLICATIONS AND ALGORITHMS
published pages: 47-60, ISSN: 1789-2198, DOI:
Advanced Logistic Systems – Theory and Practice 12(1) 2019-10-10
2018 Bányai Tamás, Illés Béla, Christian Landschützer, Fabian Schenk, Flavien Massi
COOPERATION IN LOGISTICS TECHNOLOGY RESEARCH: HOW TWINNING PROJECT AFFECTS R+D IN THE FIELD OF LOGISTIC SYSTEMS AND NETWORKS
published pages: 61-76, ISSN: 1789-2198, DOI:
Advanced Logistic Systems – Theory and Practice 12(1) 2019-10-10
2018 György Kovács
Methods for Efficiency Improvement of Production and Logistic Processes
published pages: 55-61, ISSN: 1338-0532, DOI: 10.2478/rput-2018-0006
Research Papers Faculty of Materials Science and Technology Slovak University of Technology 26/42 2019-10-10
2017 Tamas, Péter ; Dobos, Péter ; Illés, Béla
Examination of improvement possibilities in warehouse management systems
published pages: 1-6. , 6 p., ISSN: 1860-5923, DOI: 10.2195/lj_notrev_tamas_en_201709_01
LOGISTICS JOURNAL Vol. 2017. 2019-10-10
2016 György Kovács
LOGISTICS AND PRODUCTION PROCESSES TODAY AND TOMORROW
published pages: 1-5, ISSN: 1339-5629, DOI: 10.22306/al.v3i4.71
Acta logistica 3/4 2019-10-10
2017 György Kovács, Miklós Gubán
Planning of Optimal Fuel Supply of International Transport Activity
published pages: 186, ISSN: 0303-7800, DOI: 10.3311/pptr.10843
Periodica Polytechnica Transportation Engineering 45/4 2019-10-10
2018 Péter Telek; Wolfgang Trummer
Introduction of Demo3D into the scientific education of material handling
published pages: 61-76, ISSN: 1789-2198, DOI:
Advanced Logistic Systems – Theory and Practice 12(1) 2019-10-10
2017 György Kovács
OPTIMIZATION METHOD AND SOFTWARE FOR FUEL COST REDUCTION IN CASE OF ROAD TRANSPORT ACTIVITY
published pages: 201-208, ISSN: 1210-2709, DOI: 10.14311/ap.2017.57.0201
Acta Polytechnica 57/3 2019-10-10
2019 György Kovács, Béla Illés
Development of an Optimization Method and Software for Optimizing Global Supply Chains for Increased Efficiency, Competitiveness, and Sustainability
published pages: 1610, ISSN: 2071-1050, DOI: 10.3390/su11061610
Sustainability 11/6 2019-10-10
2016 Gyorgy Kovacs, Sebastian Kot
NEW LOGISTICS AND PRODUCTION TRENDS AS THE EFFECTOF GLOBAL ECONOMY CHANGES
published pages: 115-126, ISSN: 2081-7452, DOI: 10.17512/pjms.2016.14.2.11
Polish Journal of Management Studies 14/2 2019-10-10
2017 Tamás Péter
LEAN ESZKÖZÖK HATÉKONYSÁGNÖVELÉSE SZIMULÁCIÓS MODELLEZÉS FELHASZNÁLÁSÁVAL
published pages: pp. 61-70. , 10 , ISSN: 2498-9037, DOI:
LOGISZTIKA - INFORMATIKA - MENEDZSMENT    2 : 1 (2017) 2019-10-10
2017 Szabolcs, Szentesi ; Dr. Péter, Tamás ; Dr. Béla, Illés
Examination of improvement possibilities in warehouse management systems
published pages: pp. 57-63., ISSN: 2406-1069, DOI:
TRANSPORT & LOGISTICS: the International Journal 17 : 43 (2017) 2019-10-10
2017 Illés Béla
Logisztika és digitalizálás
published pages: pp. 30-36, ISSN: 1218-3849, DOI:
Logisztikai Évkönyv 2017 2019-10-10
2018 RABAB BENOTSMANE, LÁSZLÓ DUDÁS, GYÖRGY KOVÁCS
THE CONCEPT OF AUTONOMOUS SYSTEMS IN INDUSTRY 4.0
published pages: 77-87, ISSN: 1789-2198, DOI:
Advanced Logistic Systems – Theory and Practice 12(1) 2019-10-10
2017 György Kovács
GLOBAL ECONOMIC CHANGES, OPTIMIZATION OF VIRTUAL ENTERPRISES - SOFTWARE DEVELOPMENT
published pages: 125-131, ISSN: 2081-7452, DOI: 10.17512/pjms.2017.15.2.11
Polish Journal of Management Studies 15/2 2019-10-10
2017 Tamás, Péter
SELECTION OF OPTIMAL WAREHOUSE CAPACITY ENLARGMENT POSSIBILITY USING THE CHURCHMAN-ACKOFF WEIGHTING METHOD
published pages: 50-58. , 9 p., ISSN: 2406-1069, DOI:
TRANSPORT & LOGISTICS: the International Journal 17 : 43 (2017) 2019-10-10
2018 Péter Tamás
Innovative Business Model for Realization of Sustainable Supply Chain at the Outsourcing Examination of Logistics Services
published pages: 210, ISSN: 2071-1050, DOI: 10.3390/su10010210
Sustainability 10/1 2019-10-10
2017 Péter Tamás, Béla Illés
Examining the Integration Possibilities for Lean Tools and Simulation Modeling
published pages: 516-522, ISSN: 1662-9779, DOI: 10.4028/www.scientific.net/ssp.261.516
Solid State Phenomena 261 2019-10-10
2017 Béla Illés, Péter Tamás, Péter Dobos, Róbert Skapinyecz
New Challenges for Quality Assurance of Manufacturing Processes in Industry 4.0
published pages: 481-486, ISSN: 1662-9779, DOI: 10.4028/www.scientific.net/ssp.261.481
Solid State Phenomena 261 2019-10-10
2018 Tamás Bányai, Christian Landschützer, Ágota Bányai
Markov-Chain Simulation-Based Analysis of Human Resource Structure: How Staff Deployment and Staffing Affect Sustainable Human Resource Strategy
published pages: 3692, ISSN: 2071-1050, DOI: 10.3390/su10103692
Sustainability 10/10 2019-10-10
2018 Péter Telek
Effects of Logistic Processes to the Maintenance Time
published pages: 135-143, ISSN: 1338-0532, DOI: 10.2478/rput-2018-0016
Research Papers Faculty of Materials Science and Technology Slovak University of Technology 26/42 2019-10-10
2018 Péter Telek
Process-based planning of material handling in manufacturing systems
published pages: 12018, ISSN: 1757-899X, DOI: 10.1088/1757-899x/448/1/012018
IOP Conference Series: Materials Science and Engineering 448 2019-10-10
2018 János Juhász, Tamás Bányai
Last mile logistics: an integrated view
published pages: 12026, ISSN: 1757-899X, DOI: 10.1088/1757-899x/448/1/012026
IOP Conference Series: Materials Science and Engineering 448 2019-10-10
2018 G Nagy, B Illés, Á Bányai
Impact of Industry 4.0 on production logistics
published pages: 12013, ISSN: 1757-899X, DOI: 10.1088/1757-899x/448/1/012013
IOP Conference Series: Materials Science and Engineering 448 2019-10-10
2018 Kota, László ; Jármai, Károly
Többszintű optimáló algoritmus alkalmazása
published pages: pp. 32-35. , 4 p, ISSN: 0016-8572, DOI:
GÉP 69 : 2 (2018) 2019-10-10
2017 Vivien Mácsay, Tamás Bányai
TOYOTA PRODUCTION SYSTEM IN MILKRUN BASED IN-PLANT SUPPLY
published pages: 141-146, ISSN: 1821-4932, DOI: 10.24867/jpe-2017-01-141
Journal of Production Engineering 20/1 2019-10-10
2017 Péter Veres, Tamás Bányai, Béla Illés
Optimisation problems of networking manufacturing processes
published pages: 6026, ISSN: 2261-236X, DOI: 10.1051/matecconf/201711206026
MATEC Web of Conferences 112 2019-10-10
2018 Róbert, Skapinyecz ; Béla, Illés
Risk management in logistics networks: an overview of the field and some novel perspectives
published pages: pp. 41-52. , 12 , ISSN: 1789-2198, DOI:
ADVANCED LOGISTIC SYSTEMS: THEORY AND PRACTICE 11 : 1 (2018) 2019-10-10
2018 Skapinyecz Róbert
Logisztikai hálózatok rizikótényezőinek kezelése
published pages: , ISSN: , DOI:
2019-10-10
2018 Florian, Ehrentraut ; Christian, Landschützer ; Péter, Telek ; Tamás, Bányai
A new network concept for Logistic Centres in Hungary – regional segmentation in line with the PI vision
published pages: pp. 129-141., ISSN: , DOI:
Proceedings of the 5th International Physical Internet Conference 2019-10-10
2016 Gábor, Nagy ; Ágota, Bányai ; Béla, Illés
The improvement of the efficiency of purchasing by networking operation
published pages: pp. 79-90. , 12 , ISSN: 1789-2198, DOI:
ADVANCED LOGISTIC SYSTEMS: THEORY AND PRACTICE 10 : 2 (2016) 2019-10-10
2017 János Korponai, Ágota Bányainé Tóth, Béla Illés
Context of the inventory management expenses in the case of planned shortages
published pages: 26-35, ISSN: 2543-912X, DOI: 10.1515/emj-2017-0003
Engineering Management in Production and Services 9/1 2019-10-10
2018 Jármai, Károly ; Kota, László
Az OZone program használata
published pages: pp. 28-32. , 5 p, ISSN: 1785-4822, DOI:
MAGÉSZ ACÉLSZERKEZETEK 15 : 4 (2018) 2019-10-10
2016 Jármai, Károly ; Kota, László
Az Open Journal Systems rendszer bemutatása
published pages: pp. 18-22. , 5 p, ISSN: 0016-8572, DOI:
GÉP 67 : 3 (2016) 2019-10-10
2018 Tamás Bányai
Real-Time Decision Making in First Mile and Last Mile Logistics: How Smart Scheduling Affects Energy Efficiency of Hyperconnected Supply Chain Solutions
published pages: 1833, ISSN: 1996-1073, DOI: 10.3390/en11071833
Energies 11/7 2019-10-10
2017 Ágota Bányai, Tamás Bányai, Béla Illés
Optimization of Consignment-Store-Based Supply Chain with Black Hole Algorithm
published pages: 1-12, ISSN: 1076-2787, DOI: 10.1155/2017/6038973
Complexity 2017 2019-10-10
2017 Olaf, Poenicke ; Martin, Kirch ; Klaus, Richter ; Falko, Schmid ; Péter, Telek
Wearable solutions for efficient manual logistics processes - RFID Wristband and Smart-Glasses
published pages: pp. 171-180. , 1, ISSN: , DOI:
4th International Physical Internet Conference 2019-10-10
2017 Béla Illés, Péter Telek
Results of the UMI-TWINN Project During Months 1-15
published pages: 6 p., ISSN: , DOI:
MultiScience - XXXI. microCAD International Multidisciplinary Scientific Conference 2019-10-10
2018 R Skapinyecz, B Illés, Á Bányai
Logistic aspects of Industry 4.0
published pages: 12014, ISSN: 1757-899X, DOI: 10.1088/1757-899x/448/1/012014
IOP Conference Series: Materials Science and Engineering 448 2019-10-10
2017 József Konyha, Tamás Bányai
Sensor Networks for Smart Manufacturing Processes
published pages: 456-462, ISSN: 1662-9779, DOI: 10.4028/www.scientific.net/ssp.261.456
Solid State Phenomena 261 2019-10-10
2017 Péter, Telek ; Christian, Landschützer
Complexity Analysis of Material Handling Design Processes
published pages: pp. 61-76. , 16 , ISSN: 1789-2198, DOI:
ADVANCED LOGISTIC SYSTEMS: THEORY AND PRACTICE 11 : 1 (2017) 2019-10-10
2019 Tamás Bányai
Economic aspects of decision making in production processes with uncertain component quality
published pages: , ISSN: 1392-2785, DOI: 10.5755/j01.ee.30.1.19324
Engineering Economics 30/1 2019-10-10
2017 János Korponai, Ágota Bányainé Tóth, Béla Illés
The Effect of the Safety Stock on the Occurrence Probability of the Stock Shortage
published pages: 69-77, ISSN: 2082-1344, DOI: 10.1515/mper-2017-0008
Management and Production Engineering Review 8/1 2019-10-10
2017 Péter Veres, Tamás Bányai, Béla Illés
Optimization of In-Plant Production Supply with Black Hole Algorithm
published pages: 503-508, ISSN: 1662-9779, DOI: 10.4028/www.scientific.net/ssp.261.503
Solid State Phenomena 261 2019-10-10
2017 Ágota Bányainé Tóth, Béla Illés, Fabian Schenk
Supply Chain Design of Manufacturing Processes with Blending Technologies
published pages: 509-515, ISSN: 1662-9779, DOI: 10.4028/www.scientific.net/ssp.261.509
Solid State Phenomena 261 2019-10-10
2017 Tamás Bányai, Ágota Bányai
Modelling of just-in-sequence supply of manufacturing processes
published pages: 6025, ISSN: 2261-236X, DOI: 10.1051/matecconf/201711206025
MATEC Web of Conferences 112 2019-10-10
2017 Tamás Péter, Illés Béla, Dobos Péter, Skapinyecz Róbert
Gyártási folyamatok minőségbiztosításának kihívásai a 4. Ipari forradalomban
published pages: pp. 21-31. , 10 , ISSN: 2498-9037, DOI:
LOGISZTIKA - INFORMATIKA - MENEDZSMENT 2 : 1 (2017) 2019-10-10
2017 János Korponai, Ágota Bányainé Tóth, Béla Illés
Effect of the Safety Stock on the Probability of Occurrence of the Stock Shortage
published pages: 335-341, ISSN: 1877-7058, DOI: 10.1016/j.proeng.2017.03.106
Procedia Engineering 182 2019-10-10
2019 Tamás Bányai, Péter Tamás, Béla Illés, Živilė Stankevičiūtė, Ágota Bányai
Optimization of Municipal Waste Collection Routing: Impact of Industry 4.0 Technologies on Environmental Awareness and Sustainability
published pages: 634, ISSN: 1660-4601, DOI: 10.3390/ijerph16040634
International Journal of Environmental Research and Public Health 16/4 2019-10-10
2018 Tamás Bányai, Béla Illés, Ágota Bányai
Smart Scheduling: An Integrated First Mile and Last Mile Supply Approach
published pages: 1-15, ISSN: 1076-2787, DOI: 10.1155/2018/5180156
Complexity 2018 2019-10-10
2019 Ágota Bányai, Béla Illés, Elke Glistau, Norge Isaias Coello Machado, Péter Tamás, Faiza Manzoor, Tamás Bányai
Smart Cyber-Physical Manufacturing: Extended and Real-Time Optimization of Logistics Resources in Matrix Production
published pages: 1287, ISSN: 2076-3417, DOI: 10.3390/app9071287
Applied Sciences 9/7 2019-10-10

Are you the coordinator (or a participant) of this project? Plaese send me more information about the "UMI-TWINN" project.

For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.

Send me an  email (fabio@fabiodisconzi.com) and I put them in your project's page as son as possible.

Thanks. And then put a link of this page into your project's website.

The information about "UMI-TWINN" are provided by the European Opendata Portal: CORDIS opendata.

More projects from the same programme (H2020-EU.4.b.)

DRIVEN (2018)

Increasing the scientific excellence and innovation capacity in Data-Driven Simulation of the University of Luxembourg

Read More  

GeoUS (2020)

Geothermal Energy in Special Underground Structures

Read More  

DESTINI (2019)

Smart Data ProcESsing and SysTems of Deep INsIght

Read More