Opendata, web and dolomites

SMS SIGNED

Smart Morphing and Sensing

Total Cost €

0

EC-Contrib. €

0

Partnership

0

Views

0

Project "SMS" data sheet

The following table provides information about the project.

Coordinator
INSTITUT NATIONAL POLYTECHNIQUE DE TOULOUSE 

Organization address
address: ALLEE EMILE MONSO 6
city: TOULOUSE CEDEX 4
postcode: 31029
website: www.inp-toulouse.fr

contact info
title: n.a.
name: n.a.
surname: n.a.
function: n.a.
email: n.a.
telephone: n.a.
fax: n.a.

 Coordinator Country France [FR]
 Project website http://www.smartwing.org/SMS/EU
 Total cost 3˙991˙687 €
 EC max contribution 3˙991˙687 € (100%)
 Programme 1. H2020-EU.3.4. (SOCIETAL CHALLENGES - Smart, Green And Integrated Transport)
 Code Call H2020-MG-2016-Two-Stages
 Funding Scheme RIA
 Starting year 2017
 Duration (year-month-day) from 2017-05-01   to  2020-04-30

 Partnership

Take a look of project's partnership.

# participants  country  role  EC contrib. [€] 
1    INSTITUT NATIONAL POLYTECHNIQUE DE TOULOUSE FR (TOULOUSE CEDEX 4) coordinator 932˙500.00
2    CFD SOFTWARE - ENTWICKLUNGS- UND FORSCHUNGSGESELLSCHAFT MBH DE (BERLIN) participant 391˙250.00
3    POLITECNICO DI MILANO IT (MILANO) participant 377˙375.00
4    SCHELLER TECHNOLOGY GMBH DE (WISMAR) participant 365˙875.00
5    NOVATEM FR (COURSAN) participant 349˙687.00
6    CEMENTYS FR (PARIS) participant 339˙750.00
7    INSTYTUT MASZYN PRZEPLYWOWYCH IM ROBERTA SZEWALSKIEGO POLSKIEJ AKADEMII NAUK - IMP PAN PL (GDANSK) participant 335˙562.00
8    CFS ENGINEERING SA CH (LAUSANNE) participant 331˙250.00
9    OFFICE NATIONAL D'ETUDES ET DE RECHERCHES AEROSPATIALES FR (PALAISEAU) participant 319˙687.00
10    NATIONAL TECHNICAL UNIVERSITY OF ATHENS - NTUA EL (ATHINA) participant 248˙750.00

Map

 Project objective

Smart Morphing & Sensing is a multidisciplinary project associating novel electroactive actuators and sensors to increase aerodynamic efficiency and attenuate vibrations and noise. This is achieved via aerostructural morphing exploiting the real-time information from the distributed actuation and sensing systems. This goal is achieved by actuating the smart-materials to deform the structure according to optimum shape design by means of Flight Control Commands. The novel “intelligent material” technology is a hybrid association of small piezo-actuators distributed along the control surface, of Shape Memory Alloys and of Electroactive Polymers, disposed under the ‘skin’ of the active structure. This novel hybrid design allows associating fast time response and vibrational actuation with simultaneous high deformation ability. The ability in capturing energy from the already existing vibrations and redistributing it in the actuation will be used to partially supply the system and therefore ensure an economic and realistic morphing. This is beyond the cutting edge of the state of the art in morphing concepts. The use of novel distributed pressure sensors based on fiber Bragg grating provides real-time information on the actuation performance and the flight situation enabling an efficient in-situ optimization using a dedicated controller interfacing the actuators with the fiber based sensors. Aerodynamic and structural experiments are included to demonstrate the abilities of the new integrated smart sensing and morphing design via real-time actuation. High-fidelity aeroelastic computations are used to optimize the actuators location and function. The experiments will study the increase of the aerodynamic efficiency in cruise, take-off and landing by controlling the turbulence structure responsible for noise and vibration. The main configuration will be based on the Airbus A320 type wing with morphing flap.

 Deliverables

List of deliverables.
RS prototype(s) experimental results Documents, reports 2020-04-02 09:22:22
CFDSM coupling Documents, reports 2020-04-02 09:22:07
MDO results Documents, reports 2020-04-02 09:22:14
workshop Other 2020-01-27 14:38:08
SMS Website Websites, patent fillings, videos etc. 2020-01-27 14:38:08
RS prototype(s) performance evaluation Documents, reports 2020-01-27 14:38:08

Take a look to the deliverables list in detail:  detailed list of SMS deliverables.

 Publications

year authors and title journal last update
List of publications.
2018 G Jodin, Y Bmegaptche Tekap, J M Saucray, J F Rouchon, M Triantafyllou, M Braza
Optimized design of real-scale A320 morphing high-lift flap with shape memory alloys and innovative skin
published pages: 115005, ISSN: 0964-1726, DOI: 10.1088/1361-665x/aae2ef
Smart Materials and Structures 27/11 2020-01-27

Are you the coordinator (or a participant) of this project? Plaese send me more information about the "SMS" project.

For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.

Send me an  email (fabio@fabiodisconzi.com) and I put them in your project's page as son as possible.

Thanks. And then put a link of this page into your project's website.

The information about "SMS" are provided by the European Opendata Portal: CORDIS opendata.

More projects from the same programme (H2020-EU.3.4.)

BE OPEN (2019)

European forum and oBsErvatory for OPEN science in transport

Read More  

i-DREAMS (2019)

Safety tolerance zone calculation and interventions for driver-vehicle-environment interactions under challenging conditions

Read More  

TRA VISIONS 2020 (2018)

TRA VISIONS 2020

Read More