#	Pagina
attuale pagina	/open-h2020/projects/227381/index.html

Opendata, web and dolomites

ACONIT SIGNED

Actuators for Surge Control in Gas Turbine

Total Cost €

EC-Contrib. €

Partnership

Views

ACONIT project word cloud

Explore the words cloud of the ACONIT project. It provides you a very rough idea of what is the project "ACONIT" about.

fluidic joint piezo munich plans requirement improvements margin sme implantation facility aeronautics speed turbomachineries stage stable performed internal fulfill bundeswehr final electric aconit machine extension balance manufacture environment amplified actuator axial university actuators full improvement efficient performance trl domain physics postponing numerical consumption academic ctec experimental surge aircraft center energy vibration first onera temperature skills engine grouped compressor base prototypes flow readiness stall specifications ranging precisely ensam manufacturing derive onset single characterisations groups

Project "ACONIT" data sheet

The following table provides information about the project.

Coordinator	ECOLE NATIONALE SUPERIEURE D'ARTS ET METIERS Organization address address: BOULEVARD DE L HOPITAL 151 city: PARIS postcode: 75013 website: www.ensam.eu contact info title: n.a. name: n.a. surname: n.a. function: n.a. email: n.a. telephone: n.a. fax: n.a.
Coordinator Country	France [FR]
Total cost	1˙599˙627 €
EC max contribution	1˙599˙627 € (100%)
Programme	1. H2020-EU.3.4.5.10. (Thematic Topics)
Code Call	H2020-CS2-CFP10-2019-01
Funding Scheme	CS2-RIA
Starting year	2020
Duration (year-month-day)	from 2020-03-01 to 2023-08-31

Partnership

Take a look of project's partnership.

#	participants	country	role	EC contrib. [€]
1	ECOLE NATIONALE SUPERIEURE D'ARTS ET METIERS ECOLE NATIONALE SUPERIEURE D'ARTS ET METIERS Organization address address: BOULEVARD DE L HOPITAL 151 city: PARIS postcode: 75013 website: www.ensam.eu contact info title: n.a. name: n.a. surname: n.a. function: n.a. email: n.a. telephone: n.a. fax: n.a.	FR (PARIS)	coordinator	381˙500.00
2	UNIVERSITAET DER BUNDESWEHR MUENCHEN UNIVERSITAET DER BUNDESWEHR MUENCHEN Organization address address: WERNER HEISENBERG WEG 39 city: NEUBIBERG postcode: 85579 website: www.unibw.de contact info title: n.a. name: n.a. surname: n.a. function: n.a. email: n.a. telephone: n.a. fax: n.a.	DE (NEUBIBERG)	participant	485˙375.00
3	CEDRAT TECHNOLOGIES SA CEDRAT TECHNOLOGIES SA Organization address address: CHEMIN DU VIEUX CHENE 59 city: MEYLAN postcode: 38240 website: www.cedrat-technologies.com contact info title: n.a. name: n.a. surname: n.a. function: n.a. email: n.a. telephone: n.a. fax: n.a.	FR (MEYLAN)	participant	408˙750.00
4	OFFICE NATIONAL D'ETUDES ET DE RECHERCHES AEROSPATIALES OFFICE NATIONAL D'ETUDES ET DE RECHERCHES AEROSPATIALES Organization address address: CHEMIN DE LA HUNIERE city: PALAISEAU postcode: 91120 website: www.onera.fr contact info title: n.a. name: n.a. surname: n.a. function: n.a. email: n.a. telephone: n.a. fax: n.a.	FR (PALAISEAU)	participant	324˙002.00

Map

Project objective

The objective of the ACONIT project is to design, manufacture and test actuators for flow control for an implantation in an aircraft engine. The actuators will fulfill aeronautics requirement in order to increase the Technology Readiness Level (TRL) in this domain. In particular, for the present proposal, one plans to focus on the extension of the stable operating range of axial compressor, allowing thus a reduction of the surge margin through postponing the stall onset. To do so, the first objective of the work is to improve the knowledge of the flow physics of an efficient flow control system by joint numerical and experimental analysis performed in a low speed, single stage axial compressor. The results of this analysis will be used to derive the fluidic specifications for a high TRL actuators and control system. These specifications will be the base for the design and manufacturing of amplified Piezo-electric actuator prototypes whose fluidic performance and operational performance in an environment with vibration and controlled level of temperature will be precisely evaluated before manufacturing final actuators that will be integrated in a full scale engine test facility. Their performance will be evaluated in terms of Surge Margin Improvement as well as in terms of energy balance between the induced consumption and the machine performance improvements. The consortium grouped for carrying out this project is composed of a SME (CTEC), two academic institutions (Bundeswehr University Munich and ENSAM) and a Research Center (ONERA). It groups skills ranging from internal flow analysis in turbomachineries, to flow control or actuators design, manufacturing and characterisations.

Are you the coordinator (or a participant) of this project? Plaese send me more information about the "ACONIT" project.

For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.

Send me an email (fabio@fabiodisconzi.com) and I put them in your project's page as son as possible.

Thanks. And then put a link of this page into your project's website.

The information about "ACONIT" are provided by the European Opendata Portal: CORDIS opendata.