Opendata, web and dolomites

SMARTHERM SIGNED

Pilot line production of functionalized CNTs as thermal interface material for heat dissipation in electronics applications

Total Cost €

0

EC-Contrib. €

0

Partnership

0

Views

0

Project "SMARTHERM" data sheet

The following table provides information about the project.

Coordinator
THALES SA 

Organization address
address: TOUR CARPE DIEM PLACE DES COROLLES ESPLANADE NORD
city: COURBEVOIE
postcode: 92200
website: www.thalesgroup.com

contact info
title: n.a.
name: n.a.
surname: n.a.
function: n.a.
email: n.a.
telephone: n.a.
fax: n.a.

 Coordinator Country France [FR]
 Project website http://www.project-smartherm.com
 Total cost 3˙968˙145 €
 EC max contribution 2˙942˙701 € (74%)
 Programme 1. H2020-EU.3. (PRIORITY 'Societal challenges)
2. H2020-EU.2. (PRIORITY 'Industrial leadership')
 Code Call H2020-FTIPilot-2015-1
 Funding Scheme IA
 Starting year 2016
 Duration (year-month-day) from 2016-01-01   to  2018-12-31

 Partnership

Take a look of project's partnership.

# participants  country  role  EC contrib. [€] 
1    THALES SA FR (COURBEVOIE) coordinator 830˙224.00
2    SHT SMART HIGH-TECH AB SE (GOTEBORG) participant 992˙250.00
3    CHALMERS TEKNISKA HOEGSKOLA AB SE (GOETEBORG) participant 550˙000.00
4    BERLINER NANOTEST UND DESIGN GMBH DE (BERLIN) participant 350˙000.00
5    THALES MICROELECTRONICS SAS FR (ETRELLES) participant 220˙227.00

Map

 Project objective

The global economy is benefiting from the fast evolution of the semiconductor industry. The primary driving force of the semiconductor industry is the increasing integration density, which has lead not only to higher transistor density but also to increasing power density. Power density is expected to increase up to 135 W/cm2 in 2024 for single chip packages. This puts significant stress on thermal management technology. Obviously, there is a need for improved thermal management within the field, and innovative TIMs constitutes a key component in reaching this goal. TIMs with dispersion of CNTs in polymer matrices for improved thermal conductivity have been reported. However, the thermal conductivity in these composites is insufficient and fundamental limitations stem from the huge interfacial contact resistance between the CNTs and the contact resistance between the CNT ends and target surfaces. Therefore, SMARTHERM project is initiated aiming to build up a pilot production line for high-performance TIMs based on functionalized CNTs. The utilization of vertically aligned CNT structure eliminated the CNT-CNT contacts along the heat transfer path and the functionalization at the CNT ends dramatically decreased the contact resistance. The main outcomes of the SMARTHERM project are two types of CNT based TIMs manufactured in a roll-to-roll manner which allows large scale production at industrial level. The TIMs will be demonstrated by two demonstrators proposed by TRT. The consortium consists of 5 partners from 3 European countries and integrates competence from 2 big companies, 2 SMEs and 1 university. TRT and SHT have been funded by the FP7 framework programme NANOPACK and SMARTPOWER, in which SHT and TRT have obtained great amount of knowledge on CNT based TIMs. Therefore, SMARTHERM project will make use of the previous research results and push the material a big leap forward to the market.

 Deliverables

List of deliverables.
D6.2 Documents, reports 2020-01-14 11:17:04
D5.3 Documents, reports 2020-01-14 11:17:03
D3.3 Documents, reports 2020-01-14 11:17:03
D2.1 Documents, reports 2019-04-18 13:56:46
D6.1 Documents, reports 2019-04-18 13:56:41
D2.2 Documents, reports 2019-04-18 13:56:41
D4.3 Documents, reports 2019-04-18 13:56:41
D5.1 Documents, reports 2019-04-18 13:56:41
D2.3 Documents, reports 2019-04-18 13:56:40
D4.4 Documents, reports 2019-04-18 13:56:46
D1.2 Documents, reports 2019-04-18 14:55:20
D1.3 Documents, reports 2019-04-18 14:55:19
D4.1 Documents, reports 2019-04-18 14:55:14
D3.1 Documents, reports 2019-04-18 14:55:28

Take a look to the deliverables list in detail:  detailed list of SMARTHERM deliverables.

 Publications

year authors and title journal last update
List of publications.
2017 Design and realization of characterization demonstrator to investigate thermal performance of vertically aligned carbon nanotubes TIM for Avionics and Aerospace applications 23rd International workshop on Thermal investigation of IC’s and systems September 2017 Mohamad Abo Ras, Tobias von Essen, Julien Fortel, Pranav Panchal, Laurent Divay, Ana Borta-Boyon, Daniel May, Christian Chandra Darmawan, Majid Kaibiri Samani, Bernhard Wunderle, Afshin Ziaei
Design and realization of characterization demonstrator to investigate thermal performance of vertically aligned carbon nanotubes TIM for Avionics and Aerospace applications
published pages: , ISSN: , DOI:
2019-06-17

Are you the coordinator (or a participant) of this project? Plaese send me more information about the "SMARTHERM" project.

For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.

Send me an  email (fabio@fabiodisconzi.com) and I put them in your project's page as son as possible.

Thanks. And then put a link of this page into your project's website.

The information about "SMARTHERM" are provided by the European Opendata Portal: CORDIS opendata.

More projects from the same programme (H2020-EU.3.;H2020-EU.2.)

Innovation Principle (2019)

Developing an Innovation-Friendly Legislative Culture – the Innovation Principle at Work

Read More  

PULSe (2017)

Pervasive Ubiquitous Lightwave SEnsor

Read More  

MedEye (2017)

Accelerated market launch of MedEye, a plug-and-play medication safety solution

Read More