Opendata, web and dolomites

PAM^2 SIGNED

Precision Additive Metal Manufacturing

Total Cost €

0

EC-Contrib. €

0

Partnership

0

Views

0

Project "PAM^2" data sheet

The following table provides information about the project.

Coordinator
KATHOLIEKE UNIVERSITEIT LEUVEN 

Organization address
address: OUDE MARKT 13
city: LEUVEN
postcode: 3000
website: www.kuleuven.be

contact info
title: n.a.
name: n.a.
surname: n.a.
function: n.a.
email: n.a.
telephone: n.a.
fax: n.a.

 Coordinator Country Belgium [BE]
 Project website http://www.pam2.eu
 Total cost 3˙896˙180 €
 EC max contribution 3˙896˙180 € (100%)
 Programme 1. H2020-EU.1.3.1. (Fostering new skills by means of excellent initial training of researchers)
 Code Call H2020-MSCA-ITN-2016
 Funding Scheme MSCA-ITN-ETN
 Starting year 2016
 Duration (year-month-day) from 2016-12-01   to  2020-11-30

 Partnership

Take a look of project's partnership.

# participants  country  role  EC contrib. [€] 
1    KATHOLIEKE UNIVERSITEIT LEUVEN BE (LEUVEN) coordinator 751˙680.00
2    DANMARKS TEKNISKE UNIVERSITET DK (KGS LYNGBY) participant 580˙163.00
3    THE UNIVERSITY OF NOTTINGHAM UK (NOTTINGHAM) participant 546˙575.00
4    KARLSRUHER INSTITUT FUER TECHNOLOGIE DE (KARLSRUHE) participant 498˙432.00
5    LEGO SYSTEM AS DK (BILLUND) participant 290˙081.00
6    UNIVERSITA DEGLI STUDI DI PADOVA IT (PADOVA) participant 258˙061.00
7    ALICONA IMAGING GMBH AT (RAABA) participant 255˙934.00
8    TECHNISCHE UNIVERSITEIT DELFT NL (DELFT) participant 255˙374.00
9    LAYERWISE BE (LEUVEN HEVERLEE) participant 250˙560.00
10    NUOVO PIGNONE TECNOLOGIE SRL IT (FIRENZE) participant 209˙316.00
11    NUOVO PIGNONE SRL IT (FIRENZE) participant 0.00
12    ASML NETHERLANDS B.V. NL (VELDHOVEN) partner 0.00
13    MAGMA DE (AACHEN) partner 0.00

Map

 Project objective

Additive Manufacturing (AM) is a fast−growing sector with the ability to evoke a revolution in manufacturing due to its almost unlimited design freedom and its capability to produce personalised parts locally and with efficient material use. AM companies however still face technological challenges such as limited precision due to shrinkage and build−in stresses and limited process stability and robustness. Moreover often post−processing is needed due to the high roughness and remaining porosity. In addition qualified, trained personnel is hard to find. This ITN project will address both the technological and people challenges. To quality assure the parts produced, PAM² will, through a close collaboration between industry and academia, address each of the various process stages of AM with a view to implementing good precision engineering practice. To ensure the availability of trained personnel, ESRs will, next to their individual research and complementary skills training, be immersed in the whole AM production chain through hands−on workshops where they will design, model, fabricate, measure and assess a specific product. The expected impact of PAM² thus is: 1. The availability of intersectoral and interdisciplinary trained professionals in an industrial field that's very important for the future of Europe, both enhancing the ESR future career perspectives and advancing European industry. 2. The availability of high precision AM processes through improved layout rules with better use of AM possibilities, better modelling tools for first−time right processing, possibility for in−situ quality control ensuring process stability and, if still needed, optimised post−processing routes 3. As a result of 1: an increased market acceptance and penetration of AM. 4. Through the early involvement of European industry: a growing importance of the European industrial players in this fast−growing field. This will help Europe reach its target of 20% manufacturing share of GDP.

 Deliverables

List of deliverables.
Public website PAM^2 Websites, patent fillings, videos etc. 2019-05-31 16:44:20

Take a look to the deliverables list in detail:  detailed list of PAM^2 deliverables.

 Publications

year authors and title journal last update
List of publications.
2020 Solheid, Juliana; Mohanty, Sankhya; Bayat, Mohamad; Wunsch, Torsten; Weidler, Peter G.; Seifert, Hans J.; Pfleging, Wilhelm
Laser polishing of additively manufactured Ti-6Al-4V - Microstructure evolution and material properties [in press]
published pages: , ISSN: 1042-346X, DOI: 10.5445/IR/1000104497
Journal of Laser Applications 1 2020-03-11
2019 Mirko Sinico, Rajit Ranjan, Mandaná Moshiri, Can Ayas, Matthijs Langelaar, Ann Witvrouw, Fred van Keulen, Wim Dewulf
A Mold Insert Case Study on Topology Optimized Design for Additive Manufacturing
published pages: 1921-1951, ISSN: , DOI:
Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2020-02-13
2019 Umberto Paggi, Rajit Ranjan, Lore Thijs, Can Ayas, Matthijs Langelaar, Fred Van Keulen, Brecht Van Hooreweder
New support structures for reduced overheating on downfacing regions of Direct Metal Printed parts
published pages: 1626-1640, ISSN: , DOI:
Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019 2020-02-13
2019 Jitka Metelkova, Charlotte de Formanoir, Han Haitjema, Ann Witvrouw, Wilhelm Pfleging, Brecht Van Hooreweder
Elevated edges of metal parts produced by laser powder bed fusion: characterization and post-process correction
published pages: , ISSN: , DOI:
Conference Proceedings : Advancing Precision in Additive Manufacturing 2019 2019 2020-02-13
2019 Amal Charles, Ahmed Elkaseer, Mahmoud Salem, Lore Thijs, Steffen Scholz
ANN based prediction of dimensional error in down-facing surfaces for laser powder bed fusion parts
published pages: , ISSN: , DOI:
Conference Proceedings : Advancing Precision in Additive Manufacturing 2019 2019 2020-02-13
2019 Mohamad Bayat, Christopher G. Klingaa, Sankhya Mohanty, Jesper H. Hattel
Part-scale finite element thermo-mechanical modelling and validation of selective laser melting of Ti6Al4V
published pages: , ISSN: , DOI:
EUROMAT 2019 2019 2020-02-13
2019 R.K. Leach, D. Bourell, S. Carmignato, A. Donmez, N. Senin, W. Dewulf
Geometrical metrology for metal additive manufacturing
published pages: 677-700, ISSN: 0007-8506, DOI: 10.1016/j.cirp.2019.05.004
CIRP Annals 68/2 2020-02-13
2019 Anton du Plessis, Stephan G. le Roux, Jess Waller, Philip Sperling, Nils Achilles, Andre Beerlink, Jean-François Métayer, Mirko Sinico, Gabriel Probst, Wim Dewulf, Florian Bittner, Hans-Josef Endres, Marian Willner, Ágota Drégelyi-Kiss, Tomas Zikmund, Jakub Laznovsky, Jozef Kaiser, Pascal Pinter, Stefan Dietrich, Elena Lopez, Oliver Fitzek, Porebski Konrad
Laboratory X-ray tomography for metal additive manufacturing: Round robin test
published pages: 100837, ISSN: 2214-8604, DOI: 10.1016/j.addma.2019.100837
Additive Manufacturing 30 2020-02-13
2019 W. Gao, H. Haitjema, F.Z. Fang, R.K. Leach, C.F. Cheung, E. Savio, J.M. Linares
On-machine and in-process surface metrology for precision manufacturing
published pages: 843-866, ISSN: 0007-8506, DOI: 10.1016/j.cirp.2019.05.005
CIRP Annals 68/2 2020-02-13
2019 Mohamad Bayat, Sankhya Mohanty, Jesper Henri Hattel
A systematic investigation of the effects of process parameters on heat and fluid flow and metallurgical conditions during laser-based powder bed fusion of Ti6Al4V alloy
published pages: 213-230, ISSN: 0017-9310, DOI: 10.1016/j.ijheatmasstransfer.2019.05.017
International Journal of Heat and Mass Transfer 139 2020-02-13
2019 Mirko Sinico, Ann Witvrouw, Wim Dewulf
Influence of the particle size distribution on surface quality of Maraging 300 parts produced by Laser Powder Bed Fusion
published pages: , ISSN: , DOI:
Conference Proceedings : Advancing Precision in Additive Manufacturing 2019 2019 2020-02-13
2019 MIRKO SINICO, RAJIT RANJAN, MANDANÁ MOSHIRI, CAN AYAS, MATTHIJS LANGELAAR, FRED VAN KEULEN, WIM DEWULF AND ANN WITVROUW
Thermal constraint in topology optimisation
published pages: 23-28, ISSN: 0026-3699, DOI:
Mikroniek Issue 5 2020-02-13
2019 Mohamad Bayat, Aditi Thanki, Sankhya Mohanty, Ann Witvrouw, Shoufeng Yang, Jesper Thorborg, Niels Skat Tiedje, Jesper Henri Hattel
Keyhole-induced porosities in Laser-based Powder Bed Fusion (L-PBF) of Ti6Al4V: High-fidelity modelling and experimental validation
published pages: 100835, ISSN: 2214-8604, DOI: 10.1016/j.addma.2019.100835
Additive Manufacturing 30 2020-02-13
2019 Leach R. K., Shaheen A., Piano S., Sims-Waterhouse D., Bointon P.
Automated characterisation of multi-view fringe projection system for three- dimensional measurement of additively manufactured parts
published pages: , ISSN: , DOI:
Conference Proceedings : Advancing Precision in Additive Manufacturing 2019 2019 2020-02-13
2019 Jitka Metelkova Yannis Kinds Karolien Kempen Charlotte de Formanoir Ann Witvrouw Brecht Van Hooreweder
Investigation of laser defocusing for increased productivity in Selective Laser Melting
published pages: , ISSN: , DOI:
4th Workshop on Metal Additive Manufacturing Annual 2020-02-13
2019 Mohamad Bayat, Sankhya Mohanty, Jesper Henri Hattel
Multiphysics modelling of lack-of-fusion voids formation and evolution in IN718 made by multi-track/multi-layer L-PBF
published pages: 95-114, ISSN: 0017-9310, DOI: 10.1016/j.ijheatmasstransfer.2019.05.003
International Journal of Heat and Mass Transfer 139 2020-02-13
2019 Umberto Paggi, Rajit Ranjan, Lore Thijs, Can Ayas, Matthijs Langelaar, Fred van Keulen, Brecht Van Hooreweder
On the influence of overheating in downfacing regions on the surface quality and geometrical accuracy
published pages: , ISSN: , DOI:
4th Workshop on Metal Additive Manufacturing Annual 2020-02-06
2019 Jitka Metelkova, Yanis Kinds, Charlotte de Formanoir, Ann Witvrouw, Brecht Van Hooreweder
In situ combination of Selective Laser Melting and Selective Laser Erosion for edge effect removal
published pages: , ISSN: , DOI:
Solid Freeform Fabrication Symposium 2019 2020-02-06
2019 Jitka Metelkova Yannis Kinds Karolien Kempen Charlotte de Formanoir Ann Witvrouw Brecht Van Hooreweder
Investigation of laser defocusing for increased productivity in Selective Laser Melting
published pages: , ISSN: , DOI:
4th Workshop on Metal Additive Manufacturing Annual 2020-02-06
2019 Mandaná Moshiri Stefano Candeo Simone Carmignato Snakhya Mohanty Guido Tosello
Benchmarking of Laser Powder Bed Fusion Machines
published pages: 85, ISSN: 2504-4494, DOI: 10.3390/jmmp3040085
Journal of Manufacturing and Materials Processing 3/4 2019-10-15
2019 Subbareddy Darukumalli Teguh Santoso Wahyudin P. Syam Franz Helmli Richard Leach
On-machine optical surface topography measurement sensor based on focus variation
published pages: , ISSN: , DOI:
19th International Conference Proceedings: Bilbao 2019 2019-09-09
2017 Ann Witvrouw
Precision Additive Metal Manufacturing (PAM^2)
published pages: , ISSN: , DOI:
Special Interest Group Meeting : Quality Control for Additive Manufacturing 23-24 January 2017 2019-06-12
2018 Markus Baier
Evaluation Method to Determine the Focal Spot Size of a CT System with a new Designed Resolution Test-chart
published pages: 208-209, ISSN: , DOI:
Proc. 8th ICT conference 8 2019-06-12
2018 Jitka Metelkova, Yannis Kinds, Karolien Kempen, Charlotte de Formanoir, Ann Witvrouw, Brecht Van Hooreweder
On the influence of laser defocusing in Selective Laser Melting of 316L
published pages: 161-169, ISSN: 2214-8604, DOI: 10.1016/j.addma.2018.08.006
Additive Manufacturing 23 2019-06-12
2017 R. Ranjan, Y. Yang, C. Ayas, M. Langelaar, F. Van Keulen
Controlling Local Overheating in Topology Optimization for Additive Manufacturing
published pages: , ISSN: , DOI:
Dimensional Accuracy and Surface Finish in Additive Manufacturing, October 2017 2019-06-12
2018 Juliana dos Solheid Hans Jürgen Seifert Wilhelm Pfleging
Laser-assisted post-processing of additive manufactured metallic parts
published pages: , ISSN: , DOI:
EUSPEN\'s 18th International Conference & Exhibition 2019-06-12
2018 Juliana dos Santos Solheid, Hans Jürgen Seifert, Wilhelm Pfleging
Laser surface modification and polishing of additive manufactured metallic parts
published pages: 280-284, ISSN: 2212-8271, DOI: 10.1016/j.procir.2018.08.111
Procedia CIRP 74 2019-06-12
2018 Mohamad Bayat; Sankhya Mohanty; Jesper H. Hattel
Thermo-fluid-metallurgical modelling of laser-based powder bed fusion process
published pages: , ISSN: , DOI:
2019-05-28
2018 Petros Stavroulakis, Danny Sims-Waterhouse, Amrozia Shaheen, Sofia Catalucci, Patrick Bointon, Yael Bis-Kong, Elodie Doyen, Georgios Tzimiropoulos, Richard Leach
External shape measurement for industrial applications using artificial intelligence and optimised data fusion
published pages: , ISSN: , DOI:
Book Series : Advances in Intelligent Systems an Computing 2019-05-28
2019 Aditi Thanki Raya Mertens Gabriel Probst Wim Dewulf Ann Witvrouw Shoufeng Yang
Study of keyhole-porosities in selective laser melting using X-ray computed tomography
published pages: , ISSN: , DOI:
2019-05-28
2018 Mohamad Bayat, Sankhya Mohanty, Jesper H Hattel
Numerical modelling and parametric study of grain morphology and resultant mechanical properties from selective laser melting process of Ti6Al4V
published pages: , ISSN: , DOI:
EUSPEN 18th International Conference & Exhibition 2019-05-28
2018 David De Baere, Emilie Hørdum Valente, Sankhya Mohanty, Jesper Henri Hattel
Modelling of the microstructural evolution of Ti6Al4V parts produced by selective laser melting during heat treatment
published pages: , ISSN: , DOI:
euspen\'s 18th International Conference & Exhibition 2019-05-28
2018 Amal Charles Prashanth, Ahmed Elkaseer, Tobias Mueller, Lore Thijs, Veit Hagenmeyer, Steffen Scholz
Effect of process parameters on dimensional accuracy of down-facing surfaces in Selective Laser Melting of Ti6Al4V
published pages: 83-88, ISSN: , DOI:
2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing Volume 69 2019-05-28
2018 Mandaná Moshiri Guido Tosello Sankhya Mohanty
Defects investigation in additively manufactured steel products for injection moulding
published pages: , ISSN: , DOI:
2019-05-28
2018 Rajit Ranjan Yabin Yang Can Ayas Matthijs Langelaar Fred van Keulen
Controlling local overheating in additive manufacturing parts usingtopology optimization
published pages: , ISSN: , DOI:
2019-05-28
2018 David De Baere, Mohamad Bayat, Sankhya Mohanty, Jesper Hattel
Thermo-fluid-metallurgical modelling of the selective laser melting process chain
published pages: 87-91, ISSN: 2212-8271, DOI: 10.1016/j.procir.2018.08.035
Procedia CIRP 74 2019-05-28
2018 M Bayat, D De Baere, Sankhya Mohanty, J H Hattel
MULTI-SCALE MULTIPHYSICS SIMULATION OF METAL L-PBF AM PROCESS AND SUBSEQUENT MECHANICAL ANALYSIS
published pages: , ISSN: , DOI:
Proceeding of 12th International Seminar on Numerical Analysis of Weldability 2019-05-28
2018 Amrozia Shaheen, Petros Stavroulakis, Richard Leach
Comparative study of cost effective laser and DLP projectors for fringe projection
published pages: , ISSN: , DOI:
2019-05-28
2017 Petros Stavroulakis, Patrick Bointon, Danny Sims-Waterhouse, Amrozia Shaheen, Samanta Piano, Richard Leach
Progress in realising a fast information-enriched complex form measurement system
published pages: , ISSN: , DOI:
2019-05-28
2018 Juliana S. Solheid, Hans. J. Seifert, Wilhelm Pfleging
Experimental analysis of laser post-processing of additive manufactured metallic parts
published pages: , ISSN: , DOI:
2019-05-28
2018 Amal Charles Prashanth, Ahmed Elkaseer, Tobias Müller, Lore Thijs, Maika Torge, Veit Hagenmeyer, Steffen Scholz
A study of the factors influencing generated surface roughness of down-facing surfaces in Selective Laser Melting
published pages: 327-330, ISSN: , DOI:
World Congress on Micro and Nano Manufacturing 2018 2 2019-05-28
2018 Umberto Paggi, Lore Thijs, Brecht Van Hooreweder
Guidelines for improving the quality of downfacing surfaces in Selective Laser Melting of metals
published pages: , ISSN: , DOI:
3rd Workshop on Metal Additive Manufacturing Annual 2019-05-28

Are you the coordinator (or a participant) of this project? Plaese send me more information about the "PAM^2" project.

For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.

Send me an  email (fabio@fabiodisconzi.com) and I put them in your project's page as son as possible.

Thanks. And then put a link of this page into your project's website.

The information about "PAM^2" are provided by the European Opendata Portal: CORDIS opendata.

More projects from the same programme (H2020-EU.1.3.1.)

DISTINCT (2019)

Dementia: Intersectorial Strategy for Training and Innovation Network for Current Technology (DISTINCT)

Read More  

POLISS (2019)

Policies for Smart Specialisation

Read More  

BIGMATH (2018)

Big Data Challenges for Mathematics

Read More