Opendata, web and dolomites

AMPERE SIGNED

Automated photovoltaic cell and Module industrial Production to regain and secure European Renewable Energy market

Total Cost €

0

EC-Contrib. €

0

Partnership

0

Views

0

Project "AMPERE" data sheet

The following table provides information about the project.

Coordinator
3SUN SRL 

Organization address
address: CONTRADA BLOCCO TORRAZZE ZONA INDUSTRIALE
city: CATANIA
postcode: 95121
website: www.3sun.com

contact info
title: n.a.
name: n.a.
surname: n.a.
function: n.a.
email: n.a.
telephone: n.a.
fax: n.a.

 Coordinator Country Italy [IT]
 Total cost 26˙557˙003 €
 EC max contribution 14˙952˙065 € (56%)
 Programme 1. H2020-EU.3.3.2. (Low-cost, low-carbon energy supply)
 Code Call H2020-LCE-2016-RES-IA
 Funding Scheme /IA
 Starting year 2017
 Duration (year-month-day) from 2017-05-01   to  2020-04-30

 Partnership

Take a look of project's partnership.

# participants  country  role  EC contrib. [€] 
1    3SUN SRL IT (CATANIA) coordinator 8˙301˙974.00
2    COMMISSARIAT A L ENERGIE ATOMIQUE ET AUX ENERGIES ALTERNATIVES FR (PARIS 15) participant 2˙662˙273.00
3    JONAS & REDMANN AUTOMATIONSTECHNIK GMBH DE (BERLIN) participant 630˙199.00
4    AGENZIA NAZIONALE PER LE NUOVE TECNOLOGIE, L'ENERGIA E LO SVILUPPO ECONOMICO SOSTENIBILE IT (ROMA) participant 566˙387.00
5    NORSUN AS NO (OSLO) participant 506˙141.00
6    FRAUNHOFER GESELLSCHAFT ZUR FOERDERUNG DER ANGEWANDTEN FORSCHUNG E.V. DE (MUNCHEN) participant 483˙287.00
7    ENEL GREEN POWER IT (ROMA) participant 463˙458.00
8    ENVIRONMENTAL RESOURCES MANAGEMENT LIMITED UK (LONDON) participant 440˙755.00
9    SEMILAB FELVEZETO FIZIKAI LABORATORIUM RESZVENYTARSASAG HU (BUDAPEST) participant 401˙187.00
10    CONSIGLIO NAZIONALE DELLE RICERCHE IT (ROMA) participant 253˙062.00
11    RISE TECHNOLOGY SRL IT (ROMA) participant 243˙337.00
12    CSEM CENTRE SUISSE D'ELECTRONIQUE ET DE MICROTECHNIQUE SA - RECHERCHE ET DEVELOPPEMENT CH (NEUCHATEL) participant 0.00
13    ECOLE POLYTECHNIQUE FEDERALE DE LAUSANNE CH (LAUSANNE) participant 0.00
14    MEYER BURGER AG CH (GWATT THUN) participant 0.00
15    Meyer Burger Research AG CH (HAUTERIVE) participant 0.00

Mappa

 Project objective

Today’s world PV market is dominated by standard crystalline solar cells (so-called Al-BSF cells) and part of the market is shifting to PERC solar cells. The shift is obtained by introducing three additional process steps to the standard process (rear side cleaning, passivation and laser opening), and allows a gain of typically 1% absolute in efficiency. Next generation c-Si technologies should feature higher voltage solar cells with higher efficiency and less processing steps in the manufacturing, allowing for further cost reduction, both at the PV panel level and for the final cost of solar electricity. AMPERE focuses on technologies with such a potential and capitalizes on the high tech investments made in Europe over the last decade for establishing advanced manufacturing processes for crystalline silicon heterojunction (SHJ) solar cells and modules, on the development of hardware capable of coating at high speed and low cost homogeneous materials of high electronic quality. It also bases on the unique expertise gained in production of thin film modules, and in all hardware issues related to large area coatings in production environment, which can applied for the production of SHJ cells and modules. The final goal of the project is t the setting-up of a 100 MW full-scale automated pilot line in production environment at the 3Sun fab, while preparing the next steps to 300 MW and GW scale. The project will operate with the support of full technology platforms for solar cells at CEA and the platform for advanced module technologies at MBS. It will demonstrate practically the ultra-low cost potential of such manufacturing approaches, as well as the even more impressively low solar electricity generation costs thanks to high efficiency and/or intrinsic bifaciality of the selected technologies.

 Work performed, outcomes and results:  advancements report(s) 

Are you the coordinator (or a participant) of this project? Plaese send me more information about the "AMPERE" project.

For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.

Send me an  email (fabio@fabiodisconzi.com) and I put them in your project's page as son as possible.

Thanks. And then put a link of this page into your project's website.

The information about "AMPERE" are provided by the European Opendata Portal: CORDIS opendata.

More projects from the same programme (H2020-EU.3.3.2.)

HydroFlex (2018)

Increasing the value of Hydropower through increased Flexibilty

Read More  

MegaRoller (2018)

Developing the PTO of the first MW-level Oscillating Wave Surge Converter

Read More  

IMAGINE (2018)

Innovative Method for Affordable Generation IN ocean Energy

Read More