Opendata, web and dolomites

INEX-ADAM SIGNED

INCREASING EXCELLENCE ON ADVANCED ADDITIVE MANUFACTURING

Total Cost €

0

EC-Contrib. €

0

Partnership

0

Views

0

Project "INEX-ADAM" data sheet

The following table provides information about the project.

Coordinator
SVEUCILISTE U ZAGREBU, FAKULTET STROJARSTVA I BRODOGRADNJE 

Organization address
address: IVANA LUCICA 5
city: ZAGREB
postcode: 10000
website: www.fsb.hr

contact info
title: n.a.
name: n.a.
surname: n.a.
function: n.a.
email: n.a.
telephone: n.a.
fax: n.a.

 Coordinator Country Croatia [HR]
 Total cost 997˙426 €
 EC max contribution 997˙426 € (100%)
 Programme 1. H2020-EU.4.b. (Twinning of research institutions)
 Code Call H2020-WIDESPREAD-05-2017-Twinning
 Funding Scheme CSA
 Starting year 2018
 Duration (year-month-day) from 2018-09-01   to  2021-08-31

 Partnership

Take a look of project's partnership.

# participants  country  role  EC contrib. [€] 
1    SVEUCILISTE U ZAGREBU, FAKULTET STROJARSTVA I BRODOGRADNJE HR (ZAGREB) coordinator 342˙837.00
2    LUNDS UNIVERSITET SE (LUND) participant 214˙675.00
3    BRUNEL UNIVERSITY LONDON UK (UXBRIDGE) participant 211˙263.00
4    MONTANUNIVERSITAET LEOBEN AT (LEOBEN) participant 142˙712.00
5    INSTITUTO TECNOLOGICO METALMECANICO, MUEBLE, MADERA, EMBALAJE Y AFINES-AIDIMME ES (PATERNA VALENCIA) participant 85˙937.00

Map

 Project objective

Main goal of the INEX-ADAM project is to reduce networking gaps and deficiencies among UNIZAG FSB and internationally leading EU institutions, by significantly strengthening the excellence and innovative capacity for research in the field of Additive Manufacturing (AM) within the Centre of Additive Technologies (CATeh), as integral part of UNIZAG FSB. INEX-ADAM project will increasing S&T capacity and help raise staff's research profiles in advanced fields of AM through intensive collaboration research with institutions: LTH, MUL, AIDIMME and UBRUN. Project specific objectives will encompass strengthening the synergy among research institutions, strengthening scientific and innovation capacity and raise staff's research profile of the CATeh, within three strategic research domains: Advanced Design for Additive Manufacturing – products and tools, Medical Modelling for Additive Manufacturing and Material Modelling for Additive Manufacturing, and increasing CATeh and UNIZAG FSB, national and international impact and visibility. In INEX-ADAM project, CATeh (UNIZAG FSB) is the participant with needs in advanced knowledge from strategic AM research domains. In order to be able to keep up with world trends in AM field, CATeh researchers will during INEX-ADAM project, through cooperation with project partners, leading international institutions, acquire additional knowledge for advanced application of AM. INEX-ADAM will rely on intensive knowledge transfer and training of CATeh researchers with international leading institutions and their resources as well as on ADAM - joint platform of five EU institutions, project partners. Platform will serve as driver for new level of cooperation, knowledge, expertise and business opportunities through strong synergy effect and impact on all members and stakeholders, thus foster more advanced application of AM in the fields of engineering, design and medicine.

 Deliverables

List of deliverables.
Project website Websites, patent fillings, videos etc. 2020-04-09 20:11:19
Dissemination and communication plan Documents, reports 2020-04-09 20:11:06
Curricula for training and knowledge transfer Documents, reports 2020-04-09 20:11:31
Evolution of the publications in high impact journals in the relevant research fields Documents, reports 2020-04-09 20:11:25
Project visibility elements Websites, patent fillings, videos etc. 2020-04-09 20:11:11

Take a look to the deliverables list in detail:  detailed list of INEX-ADAM deliverables.

 Publications

year authors and title journal last update
List of publications.
2016 Ana Pilipović, Bogdan Valentan, Mladen Šercer
Influence of SLS processing parameters according to the new mathematical model on flexural properties
published pages: 258-268, ISSN: 1355-2546, DOI: 10.1108/rpj-08-2014-0092
Rapid Prototyping Journal 22/2 2020-04-24
2018 Damir Godec, Lea Mandić, Robert Surma, Ana Pilipović, Miodrag Katalenić
Utjecaj parametara 3D tiskanja na savojna svojstva 3D tiskanog proizvoda
published pages: 74-79, ISSN: , DOI:
1. Znanstveno - stručno savjetovanje Tekstilna znanost i gospodarstvo 24.01.2018. 2020-04-24
2017 Joamin Gonzalez-Gutierrez, Damir Godec, Christian Kukla, Thomas Schlauf, Carlo Burkhardt, Clemens Holzer
Shaping, Debinding and Sintering of Steel Components via Fused Filament Fabrication
published pages: , ISSN: , DOI:
CIM 2017 Computer Integrated Manufacturing and High Speed Machining 8-10.06.2017 2020-04-24
2020 Damir Godec, Santiago Cano, Clemens Holzer, Joamin Gonzalez-Gutierrez
Optimization of the 3D Printing Parameters for Tensile Properties of Specimens Produced by Fused Filament Fabrication of 17-4PH Stainless Steel
published pages: 774, ISSN: 1996-1944, DOI: 10.3390/ma13030774
Materials 13/3 2020-04-24
2017 Mladen Šercer, Damir Godec, Ana Pilipović, Miodrag Katalenić
Industry 4.0 and Additive Manufacturing
published pages: 4-4, ISSN: , DOI:
Management of Technology - Step to Sustainable production MOTSP 2017 05-07.04.2017 2020-04-24
2017 Ana Pilipović, Mladen Šercer
Aditivna proizvodnja i dizajn
published pages: 89-94, ISSN: , DOI:
Tekstilna znanost i gospodarstvo, 10. znanstveno - stručno savjetovanje Komplementarnost znanosti, tehnologije i dizajna 24.1.2017 2020-04-24
2018 Ana Pilipović, Tomaž Brajlih, Igor Drstvenšek
Influence of Processing Parameters on Tensile Properties of SLS Polymer Product
published pages: 1208, ISSN: 2073-4360, DOI: 10.3390/polym10111208
Polymers 10/11 2020-04-24
2018 Damir Godec, Ivan Gabrić, Ana Pilipović, Marija Smoljkić, Robert Surma
Tensile properties of multi-material 3D-printed parts
published pages: 43-43, ISSN: , DOI:
10th International scientific conference MOTSP2018 Management of Technology Step to Sustainable Production 06.-08.06.2018. 2020-04-24
2016 Nino Krznar, Ana Pilipović, Mladen Šercer
Additive manufacturing of fixture for automated 3D scanning - case study
published pages: , ISSN: , DOI:
International Conference on Manufacturing Engineering and Materials, ICMEM 2016 06.-10.06.2016 2020-04-24
2017 Ahmet Čekić, Ana Pilipović, Đerzija Begić-Hajdarević, Narudin Gorak
Application of PolyJet Procedure on Complex Geometry - Case Study
published pages: 69-72, ISSN: , DOI:
CIM 2017 Computer Integrated Manufacturing and High Speed Machining 8-10.06.2017 2020-04-24
2017 Joamin Gonzalez-Gutierrez, Damir Godec, Radoslav Guráň, Martin Spoerk, Christian Kukla, Clemens Holzer
3D printing conditions determination for feedstock used in fused filament fabrication (FFF) of 17-4PH stainless steel parts
published pages: 117-120, ISSN: 0543-5846, DOI:
Metalurgija 1-2/57 2020-04-24
2017 Ana Pilipović, Gorana Baršić, Marko Katić
Accuracy of Polyjet 3D printed Structures
published pages: 207-212, ISSN: , DOI:
CIM 2017 Computer Integrated Manufacturing and High Speed Machining 8-10.06.2017 2020-04-24
2016 Suzana Kutnjak-Mravlinčić, Damir Godec, Ana Sutlović
3D modeliranje i 3D tisak šupljikavih struktura u obućarstvu
published pages: 100-103, ISSN: , DOI:
Zbornik radova 9. znanstveno - stručnog savjetovanja Tekstilna znanost i gospodarstvo - Kreativni mikser 25.01.2016. 2020-04-24
2017 Igor Catic, Jasmina Caloska, Damir Godec, Marijan Kovacic, Ana Pilipovic, Karolj Skala
Fluid-Deposition of Rocks is Natural Model for Additive Production
published pages: 180-189, ISSN: 1334-4676, DOI: 10.7906/indecs.15.3.2
Interdisciplinary Description of Complex Systems 15/3 2020-04-24
2019 Mladen Šercer, Damir Godec, Božidar Šantek, Roland Ludwig, Martina Andlar, Iva Rezić, Franjo Ivušić, Ana Pilipović, Damir Oros, Tonči Rezić
Microreactor Production by PolyJet Matrix 3D-Printing Technology
published pages: 272-281, ISSN: 1330-9862, DOI: 10.17113/ftb.57.02.19.5725
Food technology and biotechnology 57/2 2020-04-24
2018 Marija Smoljkić, Lana Virag, Ante Jurčević, Kristijan Kubik, Ivan Grabić, Damir Godec, Igor Karšaj
Dual 3D printed material mimicking mechanical behaviour of healthy and aneurysmal arterial tissue
published pages: , ISSN: , DOI:
10th European Solid Mechanics Conference 02-06.7.2018. 2020-04-24
2017 Robert Surma, Damir Godec, Ana Pilipović
3D printed parts reinforced with fiberglass
published pages: 369-377, ISSN: , DOI:
International Conference on Materials, corrosion, heat treatment, testing and tribology - MTECH 2017 04.-07.10.2017. 2020-04-24
2018 Damir Godec, Lea Mandić, Robert Surma, Ana Pilipović, Miodrag Katalenić
Utjecaj parametara 3D tiskanja na savojna svojstva 3D tiskanog proizvoda
published pages: 74-79, ISSN: , DOI:
11. Znanstveno - stručno savjetovanje Tekstilna znanost i gospodarstvo 24.1.2018 2020-04-24
2016 Nino Krznar, Ana Pilipović, Mladen Šercer
Additive Manufacturing of Fixture for Automated 3D Scanning – Case Study
published pages: 197-202, ISSN: 1877-7058, DOI: 10.1016/j.proeng.2016.06.656
Procedia Engineering 149 2020-04-24
2019 Suzana Kutnjak-Mravlinčić, Ana Pilipović, Damir Godec
Selection of appropriate 3D printing orientation considering actual product
published pages: 455-460, ISSN: , DOI:
12th International Scientific Conference on Production Engineering, RIM 2019 – Development and Modernization of Production 18-20.09.2019 2020-04-24
2015 Ana Pilipović, Maja Rujnić-Sokele, Mladen Šercer
Impact of Ageing, Different Share of Recycled Material and Orientation on SLS Polyamide Product Hardness
published pages: 243-243, ISSN: , DOI:
Regional Conference Polymer Processing Society Graz 2015, PPS2015 21-25.09.2015 2020-04-24
2019 Martin Spoerk, Florian Arbeiter, Ivan Raguž, Clemens Holzer, Joamin Gonzalez-Gutierrez
Mechanical Recyclability of Polypropylene Composites Produced by Material Extrusion-Based Additive Manufacturing
published pages: 1318, ISSN: 2073-4360, DOI: 10.3390/polym11081318
Polymers 11/8 2020-04-04

Are you the coordinator (or a participant) of this project? Plaese send me more information about the "INEX-ADAM" project.

For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.

Send me an  email (fabio@fabiodisconzi.com) and I put them in your project's page as son as possible.

Thanks. And then put a link of this page into your project's website.

The information about "INEX-ADAM" are provided by the European Opendata Portal: CORDIS opendata.

More projects from the same programme (H2020-EU.4.b.)

NEUROTWIN (2019)

Pan-European twinning to re-establish world-level Neuroscience Centre in Kiev (NEUROTWIN)

Read More  

DESTINI (2019)

Smart Data ProcESsing and SysTems of Deep INsIght

Read More  

GeoUS (2020)

Geothermal Energy in Special Underground Structures

Read More