Opendata, web and dolomites

LASER4SURF SIGNED

LASER FOR MASS PRODUCTION OF FUNCTIONALISED METALLIC SURFACES

Total Cost €

0

EC-Contrib. €

0

Partnership

0

Views

0

Project "LASER4SURF" data sheet

The following table provides information about the project.

Coordinator
ASOCIACION CENTRO TECNOLOGICO CEIT-IK4 

Organization address
address: PASEO MANUEL DE LARDIZABAL 15
city: SAN SEBASTIAN
postcode: 20018
website: www.ceit.es

contact info
title: n.a.
name: n.a.
surname: n.a.
function: n.a.
email: n.a.
telephone: n.a.
fax: n.a.

 Coordinator Country Spain [ES]
 Project website https://www.laser4surf.eu/
 Total cost 4˙077˙750 €
 EC max contribution 4˙077˙750 € (100%)
 Programme 1. H2020-EU.2.1.5.1. (Technologies for Factories of the Future)
 Code Call H2020-FOF-2017
 Funding Scheme RIA
 Starting year 2017
 Duration (year-month-day) from 2017-10-01   to  2020-09-30

 Partnership

Take a look of project's partnership.

# participants  country  role  EC contrib. [€] 
1    ASOCIACION CENTRO TECNOLOGICO CEIT-IK4 ES (SAN SEBASTIAN) coordinator 801˙927.00
2    LASER ENGINEERING APPLICATIONS SA BE (LIEGE ANGLEUR) participant 897˙750.00
3    MULTITEL BE (MONS) participant 595˙625.00
4    CENTRO DE INVESTIGACION COOPERATIVA DE ENERGIAS ALTERNATIVAS FUNDACION, CIC ENERGIGUNE FUNDAZIOA ES (MINANO ALAVA) participant 494˙750.00
5    IRIS TECHNOLOGY SOLUTIONS, SOCIEDAD LIMITADA ES (MADRID) participant 319˙853.00
6    RESCOLL FR (PESSAC) participant 285˙457.00
7    FAGOR AUTOMATION S COOP ES (MONDRAGON) participant 249˙490.00
8    EUROPEAN SCIENCE COMMUNICATION INSTITUTE (ESCI) GGMBH DE (OLDENBURG) participant 225˙875.00
9    VISUM LIMITED IE (Listowel) participant 207˙021.00

Map

 Project objective

The main goal of the LASER4SURF project is to develop a laser based solution for the functionalization of metallic surfaces with textures ~1µm or less on mass production. This solution will be based on surface functionalization with ultrashort pulses via Laser Induced Periodic Surface Structures (LIPSS). The LASER4SURF project will develop a Laser Texturing Prototype to overcome the current barriers for the LIPSS technique to reach mass production, achieving a production rate of 0.1 min/cm2: • High process time for large 3D pieces. • Need of inline inspection methods. • Need of modelling tools for parameter selection. The development will be focused on the three main steps of the Laser texturing value chain: • Laser technology/equipment. To generate LIPSS of different pattern sizes with multiple orientations, LASER4SURF will develop an easy to integrate and control, compact and low cost optical module. • In-line inspection tool. A whole optical measurement system based on diffractometry technology will be integrate with the laser equipment including hardware and software in order to be able to monitor all different nano properties from the functionalised surfaces. • Simulation tool that will show automatically the process parameters required to obtain the desired functionality for a specific material. The simulation tool will automatically transfer the optimum laser parameters to the LIPSS equipment in order to configure it for the desired pattern. The project will combine the developments in an all in one solution, that will be validated by three different use case products that represent a broad range of the main industries, metal alloys used and required functionalities.

The LASER4SURF project will be developed by a well-balanced consortium that brings together 8 partners: 3 technology developers (CEIT, MULTITELL and VISUM), an integrator of the solutions (LASEA), three industrial partners (FAGOR, RESCOLL and CIC) and a dissemination partner (ESCI)

 Deliverables

List of deliverables.
Project website and social media channels Websites, patent fillings, videos etc. 2020-02-19 09:04:39
Introductory project video Websites, patent fillings, videos etc. 2020-02-19 09:04:39
Brochure Websites, patent fillings, videos etc. 2020-02-19 09:04:39

Take a look to the deliverables list in detail:  detailed list of LASER4SURF deliverables.

 Publications

year authors and title journal last update
List of publications.
2018 D. Bruneel, L. Cangueiro, P. Hervier, X. Bollen, G. Kerckhofs, P. J. Jacques and J. A. Ramos-de-Campos
Femtosecond micromachining of complex geometries for biomedical applications
published pages: 1-6, ISSN: , DOI:
Proceedings of LPM 2018 2020-02-19
2018 Noemí CASQUERO, Miguel. MARTÍNEZ-CALDERÓN, Noemí PÉREZ, Eduardo GRANADOS, Santiago M. OLAIZOLA, Ainara RODRÍGUEZ
Polarization conversion on noanostructured metallic surfaces fabricated by LIPSS
published pages: 1-4, ISSN: , DOI:
Proceedings of LPM 2018 2020-02-19
2018 Alejandro SAN-BLAS, Noemí CASQUERO, Sergio SÁNCHEZ, Luis Miguel SÁNCHEZ-BREA, Jerónimo BUENCUERPO, Ainara RODRÍGUEZ, Santiago Miguel OLAIZOLA
Tailoring birefringence of LIPSS through thin film coatings
published pages: 1-5, ISSN: , DOI:
Proceedings of LPM 2018 2020-02-19

Are you the coordinator (or a participant) of this project? Plaese send me more information about the "LASER4SURF" project.

For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.

Send me an  email (fabio@fabiodisconzi.com) and I put them in your project's page as son as possible.

Thanks. And then put a link of this page into your project's website.

The information about "LASER4SURF" are provided by the European Opendata Portal: CORDIS opendata.

More projects from the same programme (H2020-EU.2.1.5.1.)

MF 2019 (2019)

MANUFUTURE 2019 - Sustainable Smart Manufacturing

Read More  

OPEN_NEXT (2019)

Company-Community Collaboration for Open Source Development of products and services

Read More  

HR-Recycler (2018)

Hybrid Human-Robot RECYcling plant for electriCal and eLEctRonic equipment

Read More