Coordinatore | INNOVA S.P.A.
Organization address
address: Via della Scrofa, 117 contact info |
Nazionalità Coordinatore | Italy [IT] |
Totale costo | 1˙270˙971 € |
EC contributo | 745˙993 € |
Programma | FP7-SME
Specific Programme "Capacities": Research for the benefit of SMEs |
Code Call | FP6-2002-SME-1 |
Funding Scheme | Cooperative |
Anno di inizio | 2006 |
Periodo (anno-mese-giorno) | 2006-10-01 - 2008-09-30 |
# | ||||
---|---|---|---|---|
1 |
INNOVA S.P.A.
Organization address
address: Via della Scrofa, 117 contact info |
IT (ROME) | coordinator | 0.00 |
2 |
AM ENGINEERING S.R.L.
Organization address
address: Via J. Linussio, 1 contact info |
IT (AMARO (UD)) | participant | 0.00 |
3 |
AUTOMATION, ROBOTICS AND INFORMATION AND MANUFACTURING CENTRE
Organization address
address: Parcela 205, Parque Tecnologico de Boecillo contact info |
ES (BOECILLO, VALLADOLID) | participant | 0.00 |
4 |
EMIL BROLL GMBH & CO
Organization address
address: Rhomberg's Fabrik Schwarz 7 contact info |
AT (DORNBIRN) | participant | 0.00 |
5 |
GESELLSCHAFT FUR FERTIGUNGSPROZESSPLANUNG, FORSCHUNG UND ENTWICKLUNG, PROF. DR.-ING. H.J. HELML
Organization address
address: Ulrichsberger Str. 17 contact info |
DE (DEGGENDORF) | participant | 0.00 |
6 |
GRAFOS S.R.L
Organization address
address: Via IV passi, 96 contact info |
IT (FORMIGINE (MO)) | participant | 0.00 |
7 |
MONOCROM S.L.
Organization address
address: VILANOVETA N6 contact info |
ES (VILANOVA / LA GELTRU) | participant | 0.00 |
8 |
NATIONAL RESEARCH COUNCIL
Organization address
address: P.le ALDO MORO 7 contact info |
IT (ROMA) | participant | 0.00 |
9 |
OPTICLAB S.R.L.
Organization address
address: Via Nicolo dall'Arca, 84 contact info |
IT (MODENA) | participant | 0.00 |
10 |
RETINAE S.R.L.
Organization address
address: Via Fanin 48 contact info |
IT (BOLOGNA) | participant | 0.00 |
11 |
VILNIUS UNIVERSITY
Organization address
address: Universiteto 3 contact info |
LT (VILNIUS) | participant | 0.00 |
Esplora la "nuvola delle parole (Word Cloud) per avere un'idea di massima del progetto.
Laser machineries have become more and more efficient and precise in the last years and the field of applications today very wide. Nevertheless, on the market there are no laser machineries with high operational flexibility for marking, cutting, engraving and micro-drilling metals. The objective of NOVIGLAS is to realise an innovative laser system that will allow overcoming this limitation.
The main innovation of the project regards the diode-pumped solid-state (DPSS) source, based on polycrystalline Nd:YAG (Yittrium Aluminium Garnet doped with Neodymium) ceramics. Respect to mono-crystalline Nd:YAG this material not only can be doped with an higher amount of Nd (5 times more) but can reach better optical and thermal and is easier and less expensive to produce. The particular pumping geometry adopted for the DPSS laser source (edge pumped geometry) allows to reduce the thermal stress on the Nd:YAG material. This allows obtaining an output laser beam matching high power (200 W TEMoo) with high beam quality (M2<5).
"DEVELOPMENT OF MODULAR CONSTRUCTION FOR SUSTAINABLE DESIGN, STABILITY AND SEISMIC APPLICATIONS"
Read MoreBreast biopsy system guided by Positron Emission Mammography allowing real-time 3D visualization of tumour lesion and needle insertion guidance for higher sampling accuracy and efficiency
Read More