WINGACCS

Wing Dynamics Acceleration Sensor

 Coordinatore Colibrys (Switzerland) Ltd 

 Organization address city: NEUCHATEL
postcode: 2007

contact info
Titolo: Dr.
Nome: Felix
Cognome: Rudolf
Email: send email
Telefono: +41 32 720 5362
Fax: +41 32 720 57 84

 Nazionalità Coordinatore Switzerland [CH]
 Totale costo 600˙000 €
 EC contributo 450˙000 €
 Programma FP7-JTI
Specific Programme "Cooperation": Joint Technology Initiatives
 Code Call SP1-JTI-CS-2010-02
 Funding Scheme JTI-CS
 Anno di inizio 2010
 Periodo (anno-mese-giorno) 2010-12-01   -   2012-11-30

 Partecipanti

# participant  country  role  EC contrib. [€] 
1    Colibrys (Switzerland) Ltd

 Organization address city: NEUCHATEL
postcode: 2007

contact info
Titolo: Dr.
Nome: Felix
Cognome: Rudolf
Email: send email
Telefono: +41 32 720 5362
Fax: +41 32 720 57 84

CH (NEUCHATEL) coordinator 450˙000.00

Mappa


 Word cloud

Esplora la "nuvola delle parole (Word Cloud) per avere un'idea di massima del progetto.

micro    sensor    temperature    mems    manufacture    accelerometer    fe    vibration    hz    manufacturing    accelerometers    fpga    digital    defence    warm    gt    colibrys    output    aeronautics   

 Obiettivo del progetto (Objective)

'The project aims at design and test of MEMS based accelerometer for wing structure active control and health monitoring. The key requirements are: full scale of ±10 g; bandwidth >200 Hz; 1 year composite stability: Bias:1.5 mg and SF: 1500 ppm; vibration rectification: 25 µg/g2; noise: <2 µg√Hz, warm-up transients: 10 µg/min, digital output and self test. They will be achieved with a bulk micro-machined capacitive MEMS chip, Sigma Delta closed loop architecture with an analogue FE ASIC and an FPGA for digital force feed-back control and digital output. The concept is proven on products for seismic imaging and is now adapted for inertial applications. Colibrys standard process is used to manufacture the MEMS. Results from a research project show that most key requirements are already met. The challenges are to resolve open technical issues such as warm-up behaviour, design a sensor to the specific application, reach TRL 6, and make the FPGA firmware conform to DO 178.The project includes a design phase, manufacturing and test of a demonstrator and a final sensor to validate conformity with requirements and data sheet. The project is carried out by Colibrys within the 24 month timeframe and the 600’000 € budget. Colibrys has a long track record in development, qualification and manufacturing of accelerometers for aeronautics, defence, safety critical train and industrial applications. The development team (30 engineers) is using FE and system level modelling, and various test tools for static temperature controlled tilt test, vibration, shock, temperature cycling. Colibrys manufactures > 100’000 accelerometers /year in the ISO9001 and 14001 certified MEMS fab, assembly and test facilities. Colibrys has large accelerometer background IP and will manufacture the resulting accelerometers. This project will contribute to establish a European, MEMS based, ITAR free, accelerometer supply that will profit European aeronautics, defence, and instrumentation industries.'

Altri progetti dello stesso programma (FP7-JTI)

RAMSES (2011)

Robust Advanced Materials for metal Supported SOFC

Read More  

RODTRAC (2012)

Robustness of distributed micron-sized roughness-element for transition control

Read More  

CRASHING (2014)

Characterization of Structural Behaviour for High Frequency Phenomena

Read More