Opendata, web and dolomites


Investigation and development of a new generation of machines for the processing of composite and nanocomposites materials

Total Cost €


EC-Contrib. €






Project "NEWEX" data sheet

The following table provides information about the project.


Organization address
city: LUBLIN
postcode: 20 618

contact info
title: n.a.
name: n.a.
surname: n.a.
function: n.a.
email: n.a.
telephone: n.a.
fax: n.a.

 Coordinator Country Poland [PL]
 Project website
 Total cost 1˙251˙000 €
 EC max contribution 1˙251˙000 € (100%)
 Programme 1. H2020-EU.1.3.3. (Stimulating innovation by means of cross-fertilisation of knowledge)
 Code Call H2020-MSCA-RISE-2016
 Funding Scheme MSCA-RISE
 Starting year 2017
 Duration (year-month-day) from 2017-01-01   to  2020-12-31


Take a look of project's partnership.

# participants  country  role  EC contrib. [€] 
1    POLITECHNIKA LUBELSKA PL (LUBLIN) coordinator 337˙500.00
2    UNIVERSIDADE DO MINHO PT (BRAGA) participant 270˙000.00
4    SEZ KROMPACHY AS SK (KROMPACHY) participant 144˙000.00
7    BORRA SRO CZ (PRAHA) participant 0.00


 Project objective

The main research goal of the NEWEX Project is the construction and testing of the new innovative extruder. By the application of a new, patented concept of vital parts: innovative active grooved feed section (IAGFS), original rotational barrel segment (ORBS) and special screw (SS) a completely new breakthrough technology of extrusion and plasticizing systems will be achieved. It will ensure manufacturing the products of improved properties and will enable processing materials that couldn’t be processed so far, as well as food materials, cosmetic and pharmaceutical. In parallel to the main RTD activities the NEWEX project is aiming at industry-academia cooperation and transfer of knowledge between organizations from central-eastern and Western Europe. All the project’s activities will be performed by thoroughly planned secondments and appropriate hosting institutions between industrial and academic partners. The workplan consists of 7 Workpackages, out of which: WP1-4 focus on the investigation of extruder, extrusion process and extrudate properties and tasks aiming at the selection of the best solution of new extruder vital parts, than construction and testing of new generation extruder. WP5 concentrates on networking activities (workshops, training, knowledge exchange, etc.). WP6 aims at knowledge dissemination (participation in conferences, fairs, publications, etc.), WP7 is dedicated to management and administration of the whole project. The consortium consists of 6 organizations: 3 representing academic partners and 3 representing industry partners. Project is coordinated by Lublin University of Technology (Poland). Partners are: Technical University of Kosice (Slovakia), University of Minho (Portugal), Zamak-Mercator LLC (Poland), SEZ-Krompachy a.s. (Slovakia) and Borra s.r.o. (Czech Republic). Realization of NEWEX project will foster the real industry-academia cooperation which is of the key importance in terms of European Research Area development strategy.


List of deliverables.
Training materials for T5.1, T5.2 workshops and e-Learning Other 2019-06-06 15:53:11
Physical models (3D print.) of extruder elements Demonstrators, pilots, prototypes 2019-06-06 15:53:08
e-Learning platform Other 2019-06-06 15:53:08
Training materials on T5.3 inter-sector and international cooperation Other 2019-06-06 15:53:08

Take a look to the deliverables list in detail:  detailed list of NEWEX deliverables.


year authors and title journal last update
List of publications.
2019 Renê S. Pinto, Fernanda P. Costa, Lino A. Costa, Antonio Gaspar-Cunha
A neuroevolutionary approach to feature selection using multiobjective evolutionary algorithms
published pages: 1-6, ISSN: , DOI:
Eurogen 2019 once a year 2019-10-29
2019 Ivan Gajdoš, Janusz Sikora, Ľudmila Dulebová, Ján Varga
3D Finite Elements Simulation of the Single Screw Extruder with Rotational Barrel Segment
published pages: 1-4, ISSN: , DOI:
Eurogen 2019 once a year 2019-10-29
2019 Mirosław Ferdynus
Numerical analysis of the coupled thermal-stress strength of the active grooved feed zone in an innovative extruder for plastics
published pages: 1-5, ISSN: , DOI:
Eurogen 2019 once a year 2019-10-29
2019 Hubert Dębski, Paweł Wysmulski
A Numerical Analysis of the Screw of an Extruder for Polymer Materials
published pages: 1-5, ISSN: , DOI:
Eurogen 2019 once a year 2019-10-29
2019 Janusz Sikora
Projekt NEWEX - wytłaczarka nowej generacji
published pages: 128-129, ISSN: 2082-6877, DOI:
Tworzywa Sztuczne w Przemysle 3 (10) 2019-10-28
2019 Janusz Sikora, Jan Varga
A New Solution of the Rotary Barrel Segment of a Single-screw Extrude
published pages: 99, ISSN: , DOI:
6th International Caucasian Symposium on Polymers and Advanced Materials once a year 2019-10-17
2019 Łukasz Majewski Karolina Głogowska
Review of Unconventional Barrel Designs of Plasticizing Systems Used in Single-Screw Extruders
published pages: 232-236, ISSN: 2534-997X, DOI:
2019 Karolina Głogowska Janusz Sikora Łukasz Majewski
New Concepts for the Active Grooved-Feed Section Extruder
published pages: 237-240, ISSN: 2534-997X, DOI:
2019 Ľudmila Dulebová
Spolupraca univerzit a priemyslu v projekte NEWEX na SjF
published pages: 19, ISSN: 2585-979X, DOI:
Haló 1 (28) 2019-10-03
2018 Ľudmila Dulebová, Karolina Glogowska, Jaroslav Hájek, Jakub Fic
The Effect of Adding Halloysite Nanotubes as Filler on the Mechanical Properties of Low-Density Polyethylene
published pages: 144-151, ISSN: 1662-9752, DOI: 10.4028/
Materials Science Forum 919 2019-06-11
2017 Sikora Janusz, Hajek Jaroslav, Perhacova Alzbeta
Investigation and development of a new generation of machines for the processing of composite and nanocomposite materials - NEWEX
published pages: 94-95, ISSN: , DOI:
XIII Science-Technical Conference \'Kierunki modyfikacji i zastosowań tworzyw polimerowych\', Rydzyna 15 - 17.5.2017 once a year 2019-06-11
2017 Ľudmila Dulebová, František Greškovič, Janusz W. Sikora, Volodymyr Krasinskyi
Analysis of the Mechanical Properties Change of PA6/MMT Nanocomposite System after Ageing
published pages: 52-59, ISSN: 1662-9795, DOI: 10.4028/
Key Engineering Materials 756 2019-06-11
2018 Ľudmila Dulebová, Anna Rudawska, A. Gaspar Cunha
The mechanical properties of low-density polyethylene with nanofiller mass content
published pages: 79-90, ISSN: , DOI:
Technological and design aspects of the processing of composites and nanocomposites once a year 2019-04-18
2017 Ľudmila Dulebová
H2020 - NEWEX projekt na Strojníckej fakulte
published pages: 31, ISSN: , DOI:
Haló 4(25) 2019-04-18
2018 Janusz Sikora
Projekt NEWEX: nowa generacja maszyn powstaje pod kierunkiem naukowca z PL
published pages: 6, ISSN: 2353-6136, DOI:
Kurier Lubelski 220 2019-04-18
2018 Ľudmila Dulebová
Mid-term meeting projektu NEWEX H2020
published pages: 22, ISSN: , DOI:
Haló 4 (26) 2019-04-18
2018 Janusz W. Sikora, António Gaspar Cunha
The analysis of the present and new solutions of the adjustable grooved feed section of the extruder
published pages: 41, ISSN: , DOI:
PolyChar 26 World Forum on Advanced Materials, September 10-13, 2018 Tbilisi, Georgia once every two years 2019-05-29
2017 Ľudmila Dulebová, Alžbeta Perháčová, Volodymyr Moravskyi, Volodymyr Krasinskyi
Vplyv simulovanych podmienok starnutia na tvrdost polymerneho kompozitu z PP matricou
published pages: 54-57, ISSN: 1802-1549, DOI:
Plastics Production 1 2019-04-14
2017 Ľudmila Dulebová, Bogusław Kiszka, Martina Dulebová
Influence of HNT nano-additives on the hardness of the thermoplastic composites
published pages: 22-25, ISSN: 1337-7094, DOI:
Transfer inovácií 36 2019-04-14
2018 Ľudmila Dulebová
Vyskum a vyvoj generacie strojov pre spracovanie kompozitnych a nanokompozitnych materialov
published pages: 8, ISSN: , DOI:
Košice: Dnes 5(85) 2019-04-14
2018 Łukasz Majewskia, Ján Kamenický
Microscopic evaluation of the halloysite nanotubes dispersion in the polyethylene matrix
published pages: 62, ISSN: , DOI:
PolyChar 26 World Forum on Advanced Materials, September 10-13, 2018 Tbilisi, Georgia once every two years 2019-05-29
2017 Janusz Sikora
Nowe horyzonty na Wydziale Mechanicznym dzięki H2020
published pages: 60, ISSN: 1428-4014, DOI:
Biuletyn Informacyjny POLITECHNIKI LUBELSKIEJ 1(42) 2019-04-14

Are you the coordinator (or a participant) of this project? Plaese send me more information about the "NEWEX" project.

For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.

Send me an  email ( and I put them in your project's page as son as possible.

Thanks. And then put a link of this page into your project's website.

The information about "NEWEX" are provided by the European Opendata Portal: CORDIS opendata.

More projects from the same programme (H2020-EU.1.3.3.)

CONMECH (2019)

Nonsmooth Contact Dynamics

Read More  

MAIL (2019)

Identifying Marginal Lands in Europe and strengthening their contribution potentialities in a CO2sequestration strategy

Read More  

RADON (2020)

Irradiation driven nanofabrication: computational modelling versus experiment

Read More