Opendata, web and dolomites


Centre of Excellence in Production Informatics and Control

Total Cost €


EC-Contrib. €






Project "EPIC" data sheet

The following table provides information about the project.


Organization address
address: KENDE UTCA 13-17
postcode: 1111

contact info
title: n.a.
name: n.a.
surname: n.a.
function: n.a.
email: n.a.
telephone: n.a.
fax: n.a.

 Coordinator Country Hungary [HU]
 Project website
 Total cost 10˙876˙825 €
 EC max contribution 10˙876˙825 € (100%)
 Programme 1. H2020-EU.4.a. (Teaming of excellent research institutions and low performing RDI regions)
 Code Call H2020-WIDESPREAD-01-2016-2017-TeamingPhase2
 Funding Scheme SGA-CSA
 Starting year 2017
 Duration (year-month-day) from 2017-04-01   to  2024-03-31


Take a look of project's partnership.

# participants  country  role  EC contrib. [€] 
3    EPIC INNOLABS NONPROFIT KFT. HU (BUDAPEST) participant 1˙823˙125.00
5    Fraunhofer Austria Research GmbH AT (Vienna) participant 1˙090˙000.00


 Project objective

The objective of the proposal is to establish the Centre of Excellence in Production Informatics and Control (EPIC CoE) as a leading, internationally acknowledged focus point in the field of cyber-physical production systems representing excellence in RDI. The focus is devised both from world-wide tendencies and regional S3 strategies. EPIC CoE will be constituted and run through the cooperation of the Institute for Computer Science and Control, Hungarian Academy of Sciences (MTA SZTAKI), two faculties of the Budapest University of Technology and Economics (BME) and four institutions of the Fraunhofer Gesellschaft (FhG) under the coordination of the National Research, Development and Innovation Office (NKFIH), as a governmental actor. The EPIC project will lead to: 1. The upgrade of MTA SZTAKI as existing Centre of Excellence (CoE) of the EU. 2. The establishment of a new legal entity (EPIC Ltd) of the academic partners relying on the very positive experiences gained by the Fraunhofer-SZTAKI Project Centre for Production Management and Informatics (PMI), a joint initiative of FhG and the Hungarian Academy of Sciences (MTA), started in 2010. (The cooperating FhG institutions have been the FhG IPA and Fraunhofer Austria). 3. The extension of the FhG-SZTAKI cooperation with two faculties of BME, and with FhG IPT and the FhG IPK. 4. The close cooperation of academia, university and industry, with a special emphasis on SMEs. Due to direct, institutionalized interactions with FhG, not only the scientific capabilities of the Hungarian partners but also their ability to transfer scientific results to industry-relevant applications will be enhanced, and in a sustainable way, providing a “high speed lift” to innovation culture and performance in Hungary and the CEE region. The large expectations towards the EPIC CoE are manifested by 42 Letters of Support received from industrial companies and clusters.


List of deliverables.
Project Leaflet Websites, patent fillings, videos etc. 2020-04-09 11:08:51
EPIC Flipboard Magazine Websites, patent fillings, videos etc. 2020-04-09 11:08:51
Design and publishing of the project’s official web-site and local partner web-sites Websites, patent fillings, videos etc. 2020-04-09 11:08:51

Take a look to the deliverables list in detail:  detailed list of EPIC deliverables.


year authors and title journal last update
List of publications.
2019 Norbert Geier, J. Paulo Davim, Tibor Szalay
Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: A review
published pages: 105552, ISSN: 1359-835X, DOI: 10.1016/j.compositesa.2019.105552
Composites Part A: Applied Science and Manufacturing 125 2020-04-09
2019 György Póka, István Németh
The effect of radial rake angle on chip thickness in the case of face milling
published pages: 95440541984924, ISSN: 0954-4054, DOI: 10.1177/0954405419849245
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2020-04-09
2018 Z. Szabó, T. Péni, J. Bokor
Annihilator design for linear parameter varying systems
published pages: 1185-1192, ISSN: 2405-8963, DOI: 10.1016/j.ifacol.2018.09.701
IFAC-PapersOnLine 51/24 2020-04-09
2018 Somoskői B., Geiger N.
Machinability analysis of carbon fibre-reinforced plastics using compression tools
published pages: 5-10, ISSN: , DOI:
Bánki Közlemények 1(3), 5-10, 2018 2020-04-09
2018 L Móricz, Zs J Viharos, A Németh, A Szépligeti
Indirect measurement and diagnostics of the tool wear for ceramics micro-milling optimisation
published pages: 102003, ISSN: 1742-6588, DOI: 10.1088/1742-6596/1065/10/102003
Journal of Physics: Conference Series 1065/10 2020-04-09
2019 Fazel Ansari, Robert Glawar, Tanja Nemeth
PriMa: a prescriptive maintenance model for cyber-physical production systems
published pages: 482-503, ISSN: 0951-192X, DOI: 10.1080/0951192x.2019.1571236
International Journal of Computer Integrated Manufacturing 32/4-5 2020-04-09
2018 István Biró, Tibor Szalay, Norbert Geier
Effect of cutting parameters on section borders of the empirical specific cutting force model for cutting with micro-sized uncut chip thickness
published pages: 279-282, ISSN: 2212-8271, DOI: 10.1016/j.procir.2018.09.015
Procedia CIRP 77 2020-04-09
2019 Puskas, Eszter; Bohács, Gábor
Physical Internet – a Novel Application Area for Industry 4.0
published pages: 152-161, ISSN: 2229-600x, DOI:
International Journal of Engineering and Management Sciences 4 2020-04-09
2018 Zsolt Kovács, Zsolt János Viharos, János Kodácsy
The effects of machining strategies of magnetic assisted roller burnishing on the resulted surface structure
published pages: 12002, ISSN: 1757-899X, DOI: 10.1088/1757-899x/448/1/012002
IOP Conference Series: Materials Science and Engineering 448 2020-04-09
2018 Sherwan M. Najm, Imre Paniti
Experimental Investigation on the Single Point Incremental Forming of AlMn1Mg1 Foils using Flat End Tools
published pages: 12032, ISSN: 1757-899X, DOI: 10.1088/1757-899x/448/1/012032
IOP Conference Series: Materials Science and Engineering 448 2020-04-09
2018 Balázs Németh, Péter Gáspár, Dávid Szőcs, András Mihály
Design of the optimal motions of autonomous vehicles in intersections through neural networks
published pages: 19-24, ISSN: 2405-8963, DOI: 10.1016/j.ifacol.2018.07.004
IFAC-PapersOnLine 51/9 2020-04-09
2019 Péter Polcz, Tamás Péni, Gábor Szederkényi
Computational method for estimating the domain of attraction of discrete-time uncertain rational systems
published pages: 68-83, ISSN: 0947-3580, DOI: 10.1016/j.ejcon.2018.12.004
European Journal of Control 49 2020-04-09
2018 Daisuke Tsutsumi, Dávid Gyulai, András Kovács, Bence Tipary, Yumiko Ueno, Youichi Nonaka, László Monostori
Towards joint optimization of product design, process planning and production planning in multi-product assembly
published pages: 441-446, ISSN: 0007-8506, DOI: 10.1016/j.cirp.2018.04.036
CIRP Annals 67/1 2020-04-09
2019 Elisabeth Ilie-Zudor, Davy Preuveneers, Anikó Ekárt, Eckhard Hohwieler
Smart Cyber-Physical System applications in production and logistics: special issue editorial
published pages: 327-328, ISSN: 0951-192X, DOI: 10.1080/0951192x.2019.1616152
International Journal of Computer Integrated Manufacturing 32/4-5 2020-04-09
2018 Z. Szabó, J. Bokor, S. Hara
Detection filter design for homogeneous multi-agent networks
published pages: 586-591, ISSN: 2405-8963, DOI: 10.1016/j.ifacol.2018.09.635
IFAC-PapersOnLine 51/24 2020-04-09
2019 Norbert Geier, Tibor Szalay, Márton Takács
Analysis of thrust force and characteristics of uncut fibres at non-conventional oriented drilling of unidirectional carbon fibre-reinforced plastic (UD-CFRP) composite laminates
published pages: 3139-3154, ISSN: 0268-3768, DOI: 10.1007/s00170-018-2895-8
The International Journal of Advanced Manufacturing Technology 100/9-12 2020-04-09
2019 Adam Jacso, Gyula Matyasi, Tibor Szalay
The fast constant engagement offsetting method for generating milling tool paths
published pages: 4293-4305, ISSN: 0268-3768, DOI: 10.1007/s00170-019-03834-8
The International Journal of Advanced Manufacturing Technology 103/9-12 2020-04-09
2018 Werner Kritzinger, Matthias Karner, Georg Traar, Jan Henjes, Wilfried Sihn
Digital Twin in manufacturing: A categorical literature review
published pages: , ISSN: , DOI:
16th IFAC Symposium on Information Control Problems in Manufacturin 2020-04-09
2018 Robert Glawar, Matthias Karner, Tanja Nemeth, Kurt Matyas, Wilfried Sihn
An Approach for the Integration of Anticipative Maintenance Strategies within a Production Planning and Control Model
published pages: 46-51, ISSN: 2212-8271, DOI: 10.1016/j.procir.2017.12.174
Procedia CIRP 67 2020-04-09
2018 Csaba Kardos, József Váncza
Application of Generic CAD Models for Supporting Feature Based Assembly Process Planning
published pages: 446-451, ISSN: 2212-8271, DOI: 10.1016/j.procir.2017.12.240
Procedia CIRP 67 2020-04-09
2018 Judit Monostori
Supply chains robustness: Challenges and opportunities
published pages: 110-115, ISSN: 2212-8271, DOI: 10.1016/j.procir.2017.12.185
Procedia CIRP 67 2020-04-09
2017 Xi Vincent Wang, Zsolt Kemény, József Váncza, Lihui Wang
Human–robot collaborative assembly in cyber-physical production: Classification framework and implementation
published pages: 5-8, ISSN: 0007-8506, DOI: 10.1016/j.cirp.2017.04.101
CIRP Annals 66/1 2020-04-09
2017 M. Takács, B.-Z. Balázs, J.-C. Jáuregui
Dynamical Aspects of Micro Milling Process
published pages: , ISSN: 0184-9069, DOI:
International Conference on Innovative Technologies 2020-04-09
2017 Gizem Erboz, Dr. Gábor Bohács, Dr. Zoltán Szegedi
How to Achieve Physical Internet through Lean Principles and Industry 4.0
published pages: , ISSN: , DOI:
4. Wissenschaftliche Industrielogistik-Dialog 2017 (WiLD 2017) 2020-04-09
2017 Toshiya Kaihara, Yoshiteru Katsumura, Yuuichi Suginishi, Botond Kadar
Simulation model study for manufacturing effectiveness evaluation in crowdsourced manufacturing
published pages: 445-448, ISSN: 0007-8506, DOI: 10.1016/j.cirp.2017.04.094
CIRP Annals 66/1 2020-04-09
2017 Csaba Kardos, András Kovács, József Váncza
Decomposition approach to optimal feature-based assembly planning
published pages: 417-420, ISSN: 0007-8506, DOI: 10.1016/j.cirp.2017.04.002
CIRP Annals 66/1 2020-04-09
2017 József Váncza, László Monostori
Cyber-physical Manufacturing in the Light of Professor Kanji Ueda\'s Legacy
published pages: 631-638, ISSN: 2212-8271, DOI: 10.1016/j.procir.2017.04.059
Procedia CIRP 63 2020-04-09
2018 Lukas Lingitz, Viola Gallina, Fazel Ansari, Dávid Gyulai, András Pfeiffer, Wilfried Sihn, László Monostori
Lead time prediction using machine learning algorithms: A case study by a semiconductor manufacturer
published pages: 1051-1056, ISSN: 2212-8271, DOI: 10.1016/j.procir.2018.03.148
Procedia CIRP 72 2020-04-09
2017 B.-Z. Balázs, T Szalay, M. Takács
Investigation of Micro Milled Surface Characteristics
published pages: , ISSN: 0184-9069, DOI:
International Conference on Innovative Technologies: IN-TECH 2017 2020-04-09
2017 Adam Jacso, Tibor Szalay
Analysing and Optimizing 2.5D Circular Pocket Machining Strategies
published pages: 355-364, ISSN: , DOI: 10.1007/978-3-319-68619-6_34
2018 Andor Viharos, István Németh
Simulation and scheduling of AGV based robotic assembly systems
published pages: , ISSN: , DOI:
IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2018), 2020-04-09
2018 Matthias Karner, Robert Glawar, Wilfried Sihn, Kurt Matyas
Integrating machine tool condition monitoring and production scheduling in metal forming
published pages: , ISSN: , DOI:
International Conference Management of Technology – Step to Sustainable Production (MOTSP 2018) 2020-04-09

Are you the coordinator (or a participant) of this project? Plaese send me more information about the "EPIC" project.

For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.

Send me an  email ( and I put them in your project's page as son as possible.

Thanks. And then put a link of this page into your project's website.

The information about "EPIC" are provided by the European Opendata Portal: CORDIS opendata.

More projects from the same programme (H2020-EU.4.a.)

CETOCOEN Excellence (2020)

CETOCOEN Excellence

Read More  

BBCE (2020)

Baltic Biomaterials Centre of Excellence

Read More  


Establishment of Smart City Center of Excellence

Read More