Explore the words cloud of the eTAG project. It provides you a very rough idea of what is the project "eTAG" about.
The following table provides information about the project.
QNERGY ACS LTD
|Coordinator Country||Israel [IL]|
|Total cost||71˙429 €|
|EC max contribution||50˙000 € (70%)|
1. H2020-EU.3.3. (SOCIETAL CHALLENGES - Secure, clean and efficient energy)
2. H2020-EU.2.3.1. (Mainstreaming SME support, especially through a dedicated instrument)
|Duration (year-month-day)||from 2015-03-01 to 2015-08-31|
Take a look of project's partnership.
|1||QNERGY ACS LTD||IL (EIN HAROD ICHUD)||coordinator||50˙000.00|
The eTAG (embedded ThermoAcoustic Generator) includes a novel electricity- generating thermoacoustic engine, embedded inside an existing residential boiler, to form a renewable and economic micro Combined Heat and Power (mCHP) system, without any hot moving parts. The proposed synergetic approach results with a sustainable system, taking full advantage of alternative fuels value to produce regulated electrical power as well as domestic heating, at overall energy efficiency above 90%. To enable a cost effective application, the embedded electricity generating unit must be highly reliable and maintenance free, thus a thermoacoustically based solution is expected to be the ideal solution. Qnergy has recently demonstrated 1 kW solar thermoacoustic application. However, the optimal configuration and combined system spec must be refined for best market acceptance, according to consumer’s needs and budget limitations. In common situations, a typical user will experience an ROI of less than two years; though specific government policies may lead to different optimal power capacities, as net metering allows using an oversized alternator and feedback the grid in excessive electricity. Thus our planned feasibility assessment will include a thorough business plan, focusing on market needs, time to market, and identifying the main customers and competitors; resulting in a measurable product specification and detailed risk management plan. Additionally, the key factors affecting overall system performance will be identified according to the thermo-acoustic-electrical simulation and the detailed design model. Moreover, a full freedom to operate IP survey will be performed, while the product cost, manufacturing technologies and its limitations will be covered. During phase 1 broad market understanding would be sought, allowing to better select the content and schedule of the following phase 2, focusing mostly on particular techniques for lowering the $/W value of the full system.
Are you the coordinator (or a participant) of this project? Plaese send me more information about the "ETAG" project.
For instance: the website url (it has not provided by EU-opendata yet), the logo, a more detailed description of the project (in plain text as a rtf file or a word file), some pictures (as picture files, not embedded into any word file), twitter account, linkedin page, etc.
Send me an email (firstname.lastname@example.org) and I put them in your project's page as son as possible.
Thanks. And then put a link of this page into your project's website.
The information about "ETAG" are provided by the European Opendata Portal: CORDIS opendata.
The CARGOMIL, an innovative self propelled all terrain vehicle for mobilising “where and when the biomass is”.Read More
Demonstration of a self-erection system for wind turbine towersRead More
Low cost PV cooling system for ground-mounted and rooftop systems - VaporPVRead More